Maintenance Tasks; Operator Responsibilities - Wilo CronoLine-IL-E Installation And Operating Instructions Manual

2.7

Maintenance tasks

2.8

Operator responsibilities

Installation and operating instructions • Wilo-CronoLine-IL-E, Wilo-CronoBloc-BL-E • Ed.01/2023-04
• Make it a mandatory requirement to wear hearing protection
• Demarcate the noisy areas
• Take measures to reduce noise (e.g. insulation, noise barriers)
Leakages
Observe local standards and regulations. Avoid pump leakages to
protect persons and the environment against hazardous (explos-
ive, toxic or hot) substances.
Ensure that a dry run of the pump is not possible. A dry run can
damage the shaft seal and thereby cause leakages.
• Wear the following protective equipment:
Sealed safety glasses
–
Safety shoes
–
Safety gloves for protection against cuts
–
• Only carry out the maintenance tasks described in these install-
ation and operating instructions.
• Only original parts from the manufacturer may be used for
maintenance and repairs. Use of parts other than original parts
releases the manufacturer from any liability.
• Collect any leakage of fluid and operating fluid immediately and
dispose of it according to the locally applicable guidelines.
• Tools and other objects should only be kept in their designated
places.
• After completing work, reattach all safety and monitoring
devices and check that they function properly.
• Provide installation and operating instructions in a language
which the personnel can understand.
• Make sure that personnel are suitably trained for the specified
work.
• Verify the area of responsibility and individual responsibilities
of personnel.
• Provide the necessary protective equipment and make sure
that personnel wears it.
• Train personnel with regard to the operating principles of the
system.
• Eliminate risks from electrical current.
• Equip hazardous components (extremely cold, extremely hot,
rotating, etc.) with a guard to be provided by the customer.
• Remove leakages of hazardous fluids (e.g. explosive, toxic or
hot) in such a way that no danger is posed to persons or the en-
vironment. Comply with national statutory provisions.
• Keep highly flammable materials at a safe distance from the
product.
• Ensure compliance with the regulations for accident preven-
tion.
en
11