Maintenance Tasks; Operator Responsibilities - Wilo SiBoost Smart Series Installation And Operating Instructions Manual

en
2.8

Maintenance tasks

2.9

Operator responsibilities

28
• Demarcate and cordon off the working area.
• No persons are allowed in the working area during operation.
• Depending on the process, the product is activated and deac-
tivated using separate controls. Product may automatically ac-
tivate following power cuts.
• Superior must be informed immediately of any faults or irregu-
larities.
• Operator must switch product off immediately if faults occur.
• Open all gate valves in the inlet and pressure pipe.
• Ensure protection against dry running.
• Wear the following protective equipment:
Safety footwear
–
Safety gloves for protection against cuts
–
• Disconnect device from the mains and secure it against being
switched on again without authorisation.
• Ensure cleanliness, dryness and good lighting in the work area.
• Only carry out maintenance tasks described in these installation
and operating instructions.
• Only original parts of the manufacturer may be used. The use of
any non-original parts releases the manufacturer from any liab-
ility.
• Collect any leakage of fluid and operating fluid immediately and
dispose of it according to the locally applicable guidelines.
• Clean the device thoroughly.
• Provide installation and operating instructions in a language
which the personnel can understand.
• Make sure that the personnel have received the required train-
ing for the specified work.
• Provide protective equipment. Ensure that the protective
equipment is worn by personnel.
• Ensure that safety and information signs mounted on the
device are always legible.
• Train the personnel on how the system operates.
• Eliminate any risk from electrical current.
• Demarcate and cordon off the working area.
• Define a personnel work plan for safe workflow.
• Carry out a sound pressure measurement. From a sound-pres-
sure level of 85 dB(A) upward, wear hearing protection. Include
a note in the work regulations!
Observe the following points when handling the device:
• Use is not permitted for persons under the age of 16.
• Persons under the age of 18 must be supervised by a techni-
cian!
Installation and operating instructions • Wilo-SiBoost Smart..., Wilo-SiBoost2.0 Smart... • Ed.06/2023-09