Table of Contents
Advertisement
ISL78226EVKIT1Z, ISL78224EVKIT2Z
4.3.5.1
Control Regs (Hex) Tab
The Control Regs (Hex) tab allows you to directly read and write hex data to each register location as shown in
Figure 38 on page
This tab enables the basic read/write for all active devices and contains buttons that enable you to write to and
read from configuration files. You can also use the buttons to create and load new files.
Note: use the Save Configuration File button to save user-developed specific settings. If you do not save these
settings, you must reprogram all the operational options from scratch after each power up. See
Files for Fault Response" on page 35
software.
4.3.5.2
Status Regs (H
The Status Regs (Hex) tab is similar to the Control Regs (Hex) tab except these registers are read only. The tab
is shown in
Figure 46 on page
accommodates configurations of one to four devices.
UG073 Rev.4.00
Jun 7, 2019
32. These bidirectional registers set up the device operation.
and
"Quick Start Videos" on page 6
) Tab
ex
37. There is no provision for initialization of these registers. This tab also
4. Overview - Using the Software
"Editing Startup
for more information about using the
Page 28 of 105
Advertisement
Table of Contents
