Evaluation Board Rev.0.00 Jan 18, 2018 Overview The ISL80410EVAL1Z evaluation board is designed to demonstrate the performance of the ISL80410 high voltage linear regulator. The evaluation board is available with jumpers to set the output voltage from 2.5V to 12V by configuring a single resistor.
The ISL80410EVAL1Z evaluation board is set up so that the user can easily configure the device for a specific output voltage with a single jumper. Jumper pins JP4 through JP7 set the output voltage through a discrete range of 2.5V to 12V.
Connect the exposed pad to the ground plane using as many vias as possible within the pad for the best thermal relief. ISL80410EVAL1Z Evaluation Board Figure 2. ISL80410EVAL1Z Evaluation Board (Top) UG157 Rev.0.00 Page 4 of 11...
ISL80410EVAL1Z 5. Revision History Revision History Rev. Date Description 0.00 Jan 18, 2018 Initial release UG157 Rev.0.00 Page 9 of 11 Jan 18, 2018...
Page 10
10. It is the responsibility of the buyer or distributor of Renesas Electronics products, or any other party who distributes, disposes of, or otherwise sells or transfers the product to a third party, to notify such third party in advance of the contents and conditions set forth in this document.
Need help?
Do you have a question about the ISL80410EVAL1Z and is the answer not in the manual?
Questions and answers