Table of Contents
Advertisement
ISL78226EVKIT1Z, ISL78224EVKIT2Z
The example byte of the control register in
that more than 60 different individual operator settings can exist.
Because many of these settings can have four to eight different combinations (combo selections), there can be
hundreds of operator options when determining device setup.
5.3.1
Control Register Programming
Figure 43 on page 35
device (Master, Slave 1, Slave 2, or Slave 3) is read. The right side controls which (or all) devices are
programmed during an update or write operation.
The Auto Write check box sets a flag so that the software updates registers as individual combo box selections
are changed. When the Auto Write check is off, you can make several changes, but you can have them written
only to the device registers when you click Write Register Settings.
UG073 Rev.4.00
Jun 7, 2019
Figure 41. Combo Boxes with Drop-down Selection Shown
Figure 42
Figure 42. Portion of Control Regs (Hex) Tab Spreadsheet
shows the top section of the Control Registers tab. From the tab you can select which
shows that one byte manages four different mode settings and
5. Using the Software - Detailed
Page 34 of 105
Advertisement
Table of Contents
