Table of Contents
Advertisement
② After you have completed communications, click [OPTION], select [Quit] to Main screen.
Unable to acknowledge call received:
① Click CLICK to silence the audio alarm and erase the pop-up message. The reason for [UNABLE ACK] is
displayed on the screen.
Reason for unable to acknowledge
NO REASON
BUSY
STA. BARRED
TEMP. NO ONE
CH UBABLE
*: Coast station use
②
Click [OPTION], select [Quit] to Main screen.
Note: If the coast station sends the message "QUEUE", wait until your turn comes.
If there is no response from the receiving station, do one of the following procedures:
Resend call: Click [OPTION], select [Resend].
Cancel call: Click [OPTION], select [Quit], then select [Yes] to cancel the call.
4.3.1.2 Receive an individual call
Unable acknowledge is sent automatically or manually depending on the acknowledgement method setting. Able
acknowledge is sent only manually.
Note: The handset must be on hook and all sessions must be quit to enable automatic acknowledge.
NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL
CONESTION*
QUEUE
NO OPERATOR
EUT DISABLED
MODE UBABLE
52
NVR-3000 OM.E 20230109-08
Advertisement
Table of Contents
