Table of Contents
Advertisement
④ Use the numeric keys to enter latitude/longitude of your position, and UTC time. To change coordinate, click
1 for North or East; 2 for South or West.
After enter each data, click OK.
⑤ Press and keep the DISTRESS button
for 3 seconds to send the distress alert
and wait for the acknowledgement. This
operation is same as Section 4.2.1.1.
⑥ When the distress acknowledge call is
received,
use
the
communicate with the coast station.
Refer to Section 4.2.1.1 (5).
4.2.2 Receive a Distress Call
When you receive a distress call from a ship
in distress, the audio alarm sounds, and the
LED of the DISTRESS button flashes. The
icon for DISTRESS receiving (
appears in the tab area.
Click CLICK to silence the audio alarm.
Wait for the distress acknowledgement from
a coast station.
If you do not receive the distress acknowledgement from a coast station in about 5 minutes after receiving a distress
call, please follow the flow charts in this section to determine your action.
Note: An asterisk (*) appearing in a distress alert message indicates an error at the asterisk's location.
NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL
telephone
to
)
38
NVR-3000 OM.E 20230109-08
Advertisement
Table of Contents
