Table of Contents
Advertisement
(2) After the distress call has been sent, the screen changes as below. Wait to receive the distress acknowledge call
from a coast station. The elapsed time since transmission is displayed. At this time, the icons for other DSC
received messages except the distress acknowledge call are not displayed. You can only confirm them in the
DSC log.
Note: The equipment automatically re-transmits the distress alert after 3 min 30 seconds to 4 min 30 seconds if
doesn't receive the distress acknowledge call. Then awaits the distress acknowledge call. This is repeated
until the distress call is acknowledged.
(3) Click [OPTION], you can temporarily stop the countdown during next retransmission by selecting [PAUSE] in
the user options area. [Pause] is displayed instead of the countdown indication at [RESEND] indication.
To restart, click [OPTION] again, [Pause] indication changes to [Start], select [Start]. The countdown
restarts.
You can also cancel the sending/resending by clicking [Cancel].
For example:
①
[OPTION] - [Pause]:
NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL
34
NVR-3000 OM.E 20230109-08
Advertisement
Table of Contents
