Note: When manually enter date and time, use UTC (Universal Time Coordinated). Do not use local time (LMT).
If LMT is selected, it will be showed on the bottom right of Main screen.
2.8.6 Position Setting
This is to set a position used for DSC operations only when GNSS input is not available.
Do the following to set your position:
① Click [POSITION] in [SYSTEM SETTING]. The following screen appears:
② Click [SOURCR] to select [EPFS] or [MANUAL].
[EPFS]: The position data from EPFS. The system will display "EPFS LOST POSITION" if no any data.
When [EPFS] is selected, position data will be input and updated from GNSS navigator connected.
[MANUAL]: Set the position data manually.
For [MANUAL], go to next step.
NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL
11
NVR-3000 OM.E 20230109-08