NSR Marine NVR-3000 Operation And Installation Manual
  1. Manuals
  2. Brands
  3. NSR Marine Manuals
  4. Marine Radio
  5. NVR-3000
  6. Operation and installation manual

NSR Marine NVR-3000 Operation And Installation Manual

Vhf radio（gmdss）
Hide thumbs Also See for NVR-3000:
Table of Contents

Advertisement

Quick Links

Operation Manual
&
Installation Manual
VHF RADIO（GMDSS）
NVR-3000
NVR-3000 OM.E 20210412-02

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NVR-3000 and is the answer not in the manual?

Questions and answers

Related Manuals for NSR Marine NVR-3000

Summary of Contents for NSR Marine NVR-3000

  • Page 1 Operation Manual & Installation Manual VHF RADIO（GMDSS） NVR-3000 NVR-3000 OM.E 20210412-02...
  • Page 2 Any attempt to modify the software on this device in a way not specified by NSR will result in the warranty being void. iv. Notice Please read this manual carefully to ensure proper use before installation and operation of the NVR-3000. NVR-3000 OM.E 20210412-02...
  • Page 3 MODIFY RECORD Modify by Date Paragraph Version Reason 2020/10/21 First edition 2021/04/12 General modification NVR-3000 OM.E 20210412-02...

  • Page 4: Table Of Contents

    2.10.4 Audio Test ............................ 23 2.11 User Manager ............................24 2.11.1 Private Channel .......................... 25 2.11.2 Alert list ............................26 2.11.3 User Test............................27 2.11.4 DSC Log ............................27 3. VOICE OPERATION ............................28 3.1 Channel Region Selection ........................28 NVR-3000 OM.E 20210412-02...
  • Page 5 6.2 Simple Troubleshooting .......................... 79 6.3 Error Messages ............................79 APPENDIX 1 TECHNICAL SPECIFICATIONS ....................80 APPENDIX 2 MENU TREE ..........................82 APPENDIX 3 CHANNEL TABLES ........................83 APPENDIX 4 SENTENCE DISCRIPTION ......................89 APPENDIX 5 INSTALLATION DRAWINGS ...................... 98 NVR-3000 OM.E 20210412-02...

  • Page 6: Overview

    1. OVERVIEW 1.1 Outline NVR-3000 is a ship borne radiotelephone equipment on VHF FM and designed for marine mobile service which provides function of VHF radiotelephone and digital selective calling (class A). NVR-3000 conforms to the regulations of ITU-R M.493-15, IEC 61097-3:2017, IEC 61097-7:2018, IEC 62923-1:2018, IEC 62923-2:2018, IEC 60945.
  • Page 7 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL NVR-3000 OM.E 20210412-02...

  • Page 8: Basic Operation

    ② ③ ⑤ ④ NVR-3000 can be operated by key & knob on panel or touch-screen operation. When operating with knob, rotate to select an item on screen and press the knob to confirm the selection. Panel Button Function ...

  • Page 9: Main Screen

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 2.3 Main Screen Indication Meaning Own ship's ID (9 digits) MMSI Note: Request service to set your MMSI. RX Signal Level The signal level of receiving Handset Volume The volume of handset Speaker Volume...

  • Page 10: All Channel Scan

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL for receiving. As soon as the signal disappears on CH16, the scanning between two channels will restore.  If a signal is detected on the additional channel during sampling, the transceiver will continue the sampling of 0.15s on CH16 every 2s when receiving on the additional channel.

  • Page 11: Brightness Adjustment

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 2.5 Brightness adjustment There are two ways to adjust the brightness of screen. ① Press the DIM button on panel to adjust the brightness by ten steps, or ② Click [MENU] and adjust the brightness in the [MAIN MENU]: [SYSTEM]-[DISPLAY]-[LCD DIMMER].

  • Page 12: System Setting

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL The auto acknowledgement is not sent in the following cases: • There are DSC communications (for individual call). • Channel is in use. Note: The auto acknowledgement for the individual call is sent only when the proposed channel or communication mode is available.
  • Page 13 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL Click [KEY] to switch the buzzer on or off. 2.8.3.2 ALARM BUZZER Click [SYSTEM ALARM] to switch the alarm buzzer on or off. By setting the [SYSTEM ALARM], alarm that sounds against system faults and message receiving may be enabled or disabled.

  • Page 14: Display Setting

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 2.8.3.4 SQL Click [SQL] to switch the SQL on or off. 2.8.3.5 SQL LEVEL Click [SQL LEVEL] to select the threshold value between 1~10. Note: SQL can also be set on main screen. 2.8.4 Display Setting 2.8.4.1 DISPLAY MODE...

  • Page 15: Date/Time Setting

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 2.8.4.2 CHANNEL SIZE There are two kinds of size can be selected. Click [CHANNEL SIZE] to change the size. 2.8.5 Date/Time Setting This is to set the date and time for the system. Click [DATE/TIME] in [SYSTEM SETTING] to open the [DATE/TIME SET] screen. There are four items can be set: MODE, DATE-UTC, TIME-UTC and ZONE.

  • Page 16: Position Setting

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL Note: When manually enter date and time, use UTC (Universal Time Coordinated). Do not use local time (LMT). If LMT is selected, it will be showed on the bottom right of Main screen. 2.8.6 Position Setting This is to set a position used for DSC operations only when GNSS input is not available.

  • Page 17: Timeout Setting

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL When [EPFS] is selected, position data will be input and updated from GNSS navigator connected. [MANUAL]: Set the position data manually. For [MANUAL], go to next step. ③ For manual input, click [POS&TIME], use the numeric keys to enter latitude/longitude of your position, and UTC time.

  • Page 18: Port Setting

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL [MENU BACK]: Back to the upper menu screen automatically. [TELEPHONE]: Close the inactive communications for VHF telephone. [GENERAL DSC]: Close the inactive communications except the distress call. [DISTRESS RX]: Close the inactive communications for the receiving distress call.

  • Page 19: View An Address

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 2.9.1 View an address ① Click to select the address in list. ② Click [VIEW] to see the details of the address. The address can be edited in this menu. 2.9.2 Add an address ①...
  • Page 20 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ② Click [MMSI], enter the MMSI with the numeric keys in [INPUT]. ③ Click OK to confirm. The [TYPE] is automatically changed to GROUP if you enter the group MMSI. ④ Click [NAME] to add a group name by using keys in [INPUT] and rotating the PUSH TO ENTER knob.

  • Page 21: Delete An Address

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 2.9.3 Delete an address ① Click to select an address in list. ② Click [DEL], delete the selected address directly. 2.9.4 Call to an address ① Click to select an address in list. ② Click [CALL], you can send a DSC call to the selected address. For example: ...

  • Page 22: Diagnostics

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL  To a ship: You can send INDIVIDUAL, TEST or POSITION call. After editing, click [CALL] to send the DSC call. 2.10 Diagnostics Click [DIAGOSTICS] on the [MAIN MENU] screen. The following [DIAGOSTICS] screen appears：...

  • Page 23: Lcd Test

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 2.10.2 LCD Test After clicking [LCD TEST], press the DIM button to test the Display Brightness. Press the PUSH TO ENTER knob to return to the upper menu. 2.10.3 Key Test It is designed to test whether the key, knob and touch-screen are working or not.

  • Page 24: User Manager

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL Click [AUDIO TEST], the following screen appears： Click the items to test the corresponding audio. Note: 1. The ALARM buzzer should be set to ON while do the test. 2. The setting (ON or OFF) of [MIC LOOPBACK] (used for handset microphone loop test) won’t be saved.

  • Page 25: Private Channel

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 2.11.1 Private Channel Click [PRIVATE CHANNEL], the following screen appears: ① View/Edit a private channel: Move the cursor to the wanted channel, click [VIEW], the [CHANNEL EDIT] screen appears: You can click the TYPE, TX frequency or RX frequency to edit. For example: Click [TX], enter the TX frequency with the numeric keys in [INPUT].

  • Page 26: Alert List

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 2.11.2 Alert list Click [MAIN MENU] - [USER] - [ALERT LIST ], the following menu appears. [VIEW]: Check the details of the alert selected. [MUTE]: Mute the alert. [ACK]: Acknowledge the alert. [LOG]: Check the alert history.

  • Page 27: User Test

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL Alert Description Table: Alert Alert Alert Alert Additional Alert text identifier instance category priority information 3122 WARNING DISTRESS RX Receipt of distress call 3016 CAUTION LOST POSITION No position data received 3116 CAUTION IMPAIRED RADIO...

  • Page 28: Voice Operation

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 3. VOICE OPERATION You can make a voice call at Main screen or from [MAIN MENU]-[USER]-[PRIVATE CHANNEL]-[CALL]. 3.1 Channel Region Selection The channel region can be selected by clicking [REGION] on the main menu.
  • Page 29 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL Click the number (2 ~ 4 digits) to enter channel then click OK. ② Click the channel number in the center of the screen. The following screen appears: Click to choose the desired channel.

  • Page 30: Transmit

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ③ Rotate the nob to change the directly while [ PUSH TO ENTER k channel number SQL] is OFF, or mark appears on the left side of [CH]. 3.3 Transmit  Transmitting power setting Click [POWER] to select [HIGH] (25W) or [LOW] (1W).

  • Page 31: Receive

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL  Handset Operation The handset controls voice communications. Press the PTT (push-to-talk) switch to talk, and release it to listen for response. ① Pick up the handset. ② Hold the handset close to your mouth, press the PTT switch and speak clearly.
  • Page 32 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL SQL level The SQL level can be adjusted. Please refer to Section 2.8.3.5. You can also do the following steps to adjust the squelch level. ① Click [CH], the mark appears. ② Rotate the PUSH TO ENTER knob to change the squelch level Note: While using the handset for communication, press the PTT switch to talk and release it to listen.

  • Page 33: Dsc Operation

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 4. DSC OPERATION 4.1 DSC Description DSC (Digital Selective Calling) is an important mean for emergency calls at sea. It’s a part of GMDSS (Global Maritime Distress and Safety System) set by IMO (International Marine Organization).

  • Page 34: Audio Alarms

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL Urgency: A very urgent call concerning safety of ship, aircraft or other vehicle or safety of person. Safety: A call containing an important navigational or meteorological warning. Routine: General calling.  Communication mode TELEPHONE: Telephone (F3E/G3E) by VHF radiotelephone ...

  • Page 35: Dsc Call Screens

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL Alarm Frequency (interval) Distress Count Down 2000Hz 500ms, Silence 500ms Two Tone (Distress) 2200Hz 250ms, 1300Hz 250ms Distress Ack 2200Hz 500ms, 1300Hz 500ms Urgency 2200Hz 250ms, Silence 250ms Urgency Ack 2200Hz 500ms, Silence 500ms...
  • Page 36 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 1) When receiving position data without expansion, the indication is "LAT: 12° 34N". 2) When receiving position data with expansion, the indication is "LAT: 12° 34.5678’N". 3) When receiving position data with no information for expansion, the indication is "LAT: 12° 34.----’N".

  • Page 37: Dsc Distress Operation

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 4.2. DSC Distress Operation When own ship in distress: ① Press the DISTRESS button to send a distress call. ② Wait for the distress alert acknowledgement. ③ Communicate with the coast station. 4.2.1 Send a Distress Call 4.2.1.1 By DISTRESS button with distress information not edited...
  • Page 38 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL (2) After the distress call has been sent, the screen changes as below. Wait to receive the distress acknowledge call from a coast station. The elapsed time since transmission is displayed. At this time, the icons for other DSC received messages except the distress acknowledge call are not displayed.
  • Page 39 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ② [OPTION]- [Start]: ③ [OPTION]- [Cancel]: Please see the details in Section 4.2.4 - Cancel a Distress Call. (4) You can click [Resend] to resend the distress call. Also, you can re-send the distress alert manually by pressing the DISTRESS button for 3 seconds.
  • Page 40 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL (5) When the distress acknowledge call is received, the audio alarm sounds, the LED of DISTRESS button flashes and the icon for DISTRESS ACK received ) appears. The screen changes as right. ① Click CLICK to silence the audio alarm. Then, the DISTRESS button stops flashing, and the pop-up message disappears.
  • Page 41 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ③ Click [POSITION], select [EPFS], [MANUAL] or [NO INFO] in pop-up window. [EPFS]: The position information from EPFS is automatically shown. [MANUAL]: Input your position manually. [NO INFO]: No information. For [MANUAL], go to step ④. For others, go to step ⑤.

  • Page 42: Receive A Distress Call

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ④ Use the numeric keys to enter latitude/longitude of your position, and UTC time. To change coordinate, click 1 for North or East; 2 for South or West. After enter each data, click OK.
  • Page 43 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL Note: You must wait at least 5 minutes before you can acknowledge the distress call so that the coast station has time to send a distress acknowledgement. (1) Send the DSC distress acknowledgement to ship in distress :...
  • Page 44 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ⑤ The following message appears on the screen. ⑥ Click YES to transmit the distress acknowledgement to the ship in distress. Note: You can not edit the message for the distress acknowledgement. (2) Send the distress relay to coast station: ①...
  • Page 45 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ④ Click [CALL], the screen changes to the [TX MESSAGE-RELAY INDIVIDUAL] for transmitting as following. After transmitting, the [WAIT ACK] screen appears. When the distress relay individual acknowledgement from the coast station is received, the audio alarm sounds and a pop-up message appears.

  • Page 46: Relay A Distress Call

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 4.2.3 Relay a Distress Call 4.2.3.1 Send distress relay to coast station You can send the distress relay to a coast station on behalf of a ship in distress in the following cases: ...
  • Page 47 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ④ With [TO] selected, click to enter the MMSI where to send the distress relay by numeric keys in [INPUT]. Click OK to confirm. ⑤ Click [DISTRESS ID], choose INPUT to enter the ID (MMSI) of the ship in distress with the numeric keys then click OK.
  • Page 48 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ⑦ With [POSITION] selected, click to select [EPFS], [MANUAL] or [NO INFO]. For [MANUAL], go to step ⑧. For others, go to step ⑨. ⑧ Use the numeric keys to enter latitude and longitude of the ship in distress. Switch coordinates: Click 1 to switch to North (East for longitude);...
  • Page 49 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL [Hold]: You can hold the distress relay ( changes to ) and activate it again by clicking [OPTION]. Note: If you click [CH16] to Main screen, the operation is held automatically, and click [TASK] to return to DSC screen.

  • Page 50: Cancel A Distress Call

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ⑥ Click YES, the distress relay is transmitted to all ships. 4.2.4 Cancel a Distress Call You can cancel the distress call while it is being sent or while waiting for its acknowledgement as follows.

  • Page 51: Dsc General Calls

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ④ Click [FINISH] to finish the operation. ⑤ Click [OPTION] to select the further operation. 4.3. DSC GENERAL CALLS The procedure for sending and receiving non-distress DSC messages is similar among different message types. The following is an example of the procedure for an individual call.

  • Page 52: Individual Call

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 4.3.1 Individual Call The individual call is for calling a specific station. After sending an individual call, called ACK RQ transmission, wait to receive the acknowledge back (ACK BQ) signal from the receiving station.
  • Page 53 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL (3) With [TO] selected, enter the MMSI where to send the call with the numeric keys in [INPUT]. Click OK to confirm. (4) Click [PRIORITY] to select [PRIORITY] then push the knob, select [ROUTINE], [SAFETY] or [URGENCY].
  • Page 54 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL The timer starts counting up the time since the call is sent. After the call is sent, the equipment waits for acknowledgement of the call, showing the [WAIT ACK] screen as below. You can also do the option: [Hold]/[Quit]/[Resend].
  • Page 55 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL There are three types of ACK messages: [INDIVIDUAL ACK], [INDIVIDUAL ACK] (NEW CH) and [UNABLE ACK]. (9) Do one of the following depending on the message type shown at step (9).  Individual acknowledge call received: ①...
  • Page 56 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ② After you have completed communications, click [OPTION], select [Quit] to Main screen.  Unable to acknowledge call received: ① Click CLICK to silence the audio alarm and erase the pop-up message. The reason for [UNABLE ACK] is displayed on the screen.
  • Page 57 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL  Send unable acknowledge automatically: If you cannot use the channel specified by the sending station, an unable acknowledge [CH UNABLE] is sent automatically. The [ACK SETTING] menu is set to [AUTO-UNABLE]. It takes a few seconds to transmit the call.
  • Page 58 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ② Communicate by radiotelephone. ③ After you have completed communications, click [OPTION] to select [Quit]. (2) Send unable acknowledge call ① Click [Unable]. ② With [REASON] selected, click [CALL] to send unable acknowledge call.

  • Page 59: Group Call

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ③ Set the channel by the numeric keys and click OK to confirm. For example, CH06. ④ Click [CALL], send the able to change channel acknowledge call. ⑤ Communicate by radiotelephone. ⑥ After you have completed communications, click [OPTION] to select [Quit].
  • Page 60 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL in [MESSAGE]. (2) Click [MSG TYPE] to select [GROUP]. (3) With [TO] selected, enter the group MMSI that where to send the group call in [INPUT], then click OK to confirm. (4) [PRIORITY] is automatically selected to [ROUTINE].
  • Page 61 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL Communicate by radiotelephone. (7) After you have completed communications, click [OPTION], select [Quit] and click YES to Main screen. (8) You can also do the option: [Hold] or /[Resend]. 4.3.2.2 Receive a group call Group MMSI must be registered in order to receive a group call.

  • Page 62: All Ships Call

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL (2) Watch on the channel. Communicate by radiotelephone. (3) After you have completed communications, click [OPTION] to select [Quit]. 4.3.3 All Ships Call The purpose of an all ships call is to send an urgency or safety call to all ships for assistance within the area you designate.
  • Page 63 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL (5) Click [CALL] to send the call. The screen changes as below. Communicate by radiotelephone. (6) After you have completed communications, click [OPTION], select [Quit] and click YES to Main screen. (7) You can also do the option: [Hold] or [Resend].
  • Page 64 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 4.3.3.2 Receive an all ships call When you receive an all ships call, the audio alarm sounds. The icon ( ) appears in the tab area, and the pop-up message "RECEIVED A DSC MESSAGE. ALL SHIP" appears.

  • Page 65: Position Call

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 4.3.4 Position Call There are two types of position calls: own ship requests another ship’s position and other station requires own ship's position.  Request position of other station:  Send own ship's position to other station: 4.3.4.1 Request other ship's position...
  • Page 66 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL (2) Click [MSG TYPE] to select [POSITION]. (3) Click [TO], enter the MMSI where to send the position call in [INPUT], then click OK to confirm. (4) [PRIORITY] is automatically selected to [SAFETY]. (5) Click [CALL] to send position call. The screen changes as below.
  • Page 67 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL You can also do the option during waiting acknowledgement: [Hold], [Quit] or [Resend]. (7) When you receive an acknowledge message, the audio alarm sounds and a popup message appears. (8) Click CLICK to silence the audio alarm and erase the pop-up message.
  • Page 68 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL (9) Click [OPTION], select [Quit] to back to Main screen. 4.3.4.2 Receive a position request call You can enable automatic acknowledge of position request with [POSITION] on the [ACK SETTING] menu.  Automatic reply When another ship requests your position and the setting of [POSITION] on the [ACK SETTING] menu is [AUTO], the equipment automatically transmits a reply.
  • Page 69 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL (1) To silence the audio alarm, click CLICK. (2) Click [OPTION], do the operation as follows.  Send the ACK with position information: Click [Accept], send position information of own ship. NVR-3000 OM.E 20210412-02...

  • Page 70: Test Call

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL  Send the ACK with no position information: Click [Unable]. The screen changes as below. (3) After the ACK is finished, click [OPTION] to select [Quit]. 4.3.5 Test Call 4.3.5.1 Send a test call (1) Click [DSC MSG], or click [MENU] and choose [DSC] –...
  • Page 71 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL (2) Click [MSG TYPE] to select [TEST]. (3) Click [TO], enter the MMSI where to send the test call in [INPUT], then click OK to confirm. (4) Click [CALL] to send test call. The screen changes as below.
  • Page 72 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL (6) When you receive an acknowledge message, the audio alarm sounds and a popup message appears. (7) Click CLICK to silence the audio alarm and erase the pop-up message. (8) Click [OPTION], select [Quit] to back to Main screen.
  • Page 73 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL  Manual reply When a test call is received and the setting of [TEST] on the [ACK SETTING] menu is [MANUAL], send the acknowledgement manually. When you receive a test call, the audio alarm sounds. The icon ( ) appears in the tab area, and the pop-up message "RECEIVED A DSC MESSAGE.

  • Page 74: Polling Call

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL If you click [Accept], the test acknowledgement will be sent. After the acknowledgement is finished, click [OPTION] to select [Quit]. 4.3.6 Polling Call Polling means that another ship wants to confirm if it is within communication range of own ship.
  • Page 75 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL (2) Click [OPTION], choose one of the operations: [Hold], [Quit] or [Accept]. If you click [Accept], the polling acknowledgement will be sent. After the acknowledgement is finished, click [OPTION] to select [Quit]. NVR-3000 OM.E 20210412-02...

  • Page 76: Installation

    The input data format should be NMEA0183/4800bps, as IEC61162-1 standard. Refer to the installation drawings. 5.3.3 CONNECT TO PRINTER As an optional device, NSR NPT-100 is recommended as the printer used for NVR-3000. - Part No. : NPT-100 - Rating : DC6.5V, 15W...

  • Page 77: Connect To (S)Vdr

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL Necessary settings are needed for NPT-100 before properly working with NVR-3000. Please refer to the manual supplied by the printer maker. The settings include the following parameters: - Serial port setting The output of NPT-100 should be set as SERIAL.
  • Page 78 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ③ Click [MMSI LOCK] / [ATIS ID LOCK] and choose YES to confirm the setting. And MMSI/ATIS ID will be locked afterwards. For example: ATIS LOCK. LOCK” appears after clicking [ATIS LOCK] again. “ATIS NOTE: Without a programmed MMSI, the DISTRESS button will not work! The [DSC MSG] cannot be opened either if the MMSI has not been programmed during installation.

  • Page 79: Maintenance

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 6. MAINTENANCE 6.1 Maintenance Regular maintenance helps to keep your equipment in good condition and prevents future problems. Check the items shown in the table below. Item Check point Remedy/Remarks Antenna Check for physical damage and corrosion.

  • Page 80: Appendix 1 Technical Specifications

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL APPENDIX 1 TECHNICAL SPECIFICATIONS General Specifications TX Frequency 156.025-157.425MHz RX Frequency 156.050-163.275MHz ITU channel: 52 channels USA channel: 46 channels CAN channel: 75 channels Number of Channels IWW channel:52 channels WX (Weather): channel: 10 channels...
  • Page 81 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ≥40dB ( 1kHz, 70% modulated, 30dBμV RF input) Signal To Noise Ratio ≥70dB Spurious Response Rejection ≤2nW (9kHz～2GHz) Spurious Emission ≥65dB Intermodulation Rejection ≤10% Harmonic Distortion Max Audio Output DSC Function Signal Format and Protocol Comply with the ITU-R M.493-15 and M.541-10...

  • Page 82: Appendix 2 Menu Tree

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL APPENDIX 2 MENU TREE MAIN USER PRIVATE CHANNEL MENU ALERT LIST USER TEST PRINT DSC LOG DAILY OFF HISTORY MESSAGE ADDRESS SCAN SETTING ACK SETTING REASON (NO REASON/BUSY/EUT DISABLED/CH UNABLE/MODE UNABLE) INDIVIDUAL (AUTO-UNABLE/MANUAL) POSITION (AUTO-UNABLE/MANUAL/AUTO-ABLE)

  • Page 83: Appendix 3 Channel Tables

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL APPENDIX 3 CHANNEL TABLES ITU Channel Table (ITU-RR Appendix18) TX ( MHz) RX ( MHz) REMARK 156.050 160.650 156.100 160.700 156.150 160.750 156.200 160.800 156.250 160.850 156.300 156.300 156.350 160.950 156.400 156.400 156.450 156.450 156.500...
  • Page 84 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL USA Channel Table (FCC 47 CFR Part 80: 80.215, 80.371 and 80.373) TX ( MHz) RX ( MHz) REMARK 1001 156.050 156.050 1005 156.250 156.250 156.300 156.300 1007 156.350 156.350 156.400 156.400 156.450 156.450 156.500...
  • Page 85 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL CAN Cannel Table (INDUSTRY CANADA RBR-2) TX ( MHz) RX ( MHz) REMARK 156.050 160.650 1001 156.050 156.050 156.100 160.700 156.150 160.750 156.200 160.800 156.250 160.850 1005 156.250 156.250 156.300 156.300 156.350 160.950 1007 156.350...
  • Page 86 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 156.475 156.475 156.525 156.525 For DSC operation only 156.575 156.575 156.675 156.675 156.725 156.725 156.775 156.775 Fixed at 1W 156.825 156.825 Fixed at 1W 156.875 156.875 Fixed at 1W 156.925 161.525 1078 156.925 156.925 2078 161.525...
  • Page 87 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL IWW Cannel Table (ETSI EN 300 698 V2.2.1) TX ( MHz) RX ( MHz) REMARK 156.050 160.650 156.100 160.700 156.150 160.750 156.200 160.800 156.250 160.850 156.300 156.300 Fixed at 1W 156.350 160.950 156.400 156.400 Fixed at 1W 156.450...
  • Page 88 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL WX (Weather) Channel Table (FCC Rule 47CER80.371(c) and 80.373(f)) RX (MHz) REMARK 162.550 NOAA Weather Channel / CANADA CMB Service 162.400 NOAA Weather Channel / CANADA CMB Service 162.475 NOAA Weather Channel / CANADA CMB Service 162.425...

  • Page 89: Appendix 4 Sentence Discription

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL APPENDIX 4 SENTENCE DISCRIPTION I/O Sentences Input sentences (IEC 61162-1) ACN, GGA, ZDA, GNS, RMC Output sentence (IEC 61162-1) ALF, ALC, HBT, ARC ACN – Alert command $--ACN,hhmmss.ss,aaa,x.x,x.x,c,a*hh <CR><LF> | | | | | | | +------------------------------------- 7...
  • Page 90 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL GGA -Global positioning system (GPS) fix data $--GGA,hhmmss.ss,llll.lll,a,yyyyy.yyy,a,x,xx,x.x,x.x,M,x.x,M,x.x,xxxx*hh<CR><LF> | | | | | | | | | | | | | | | | | | | | | | | | | | |...
  • Page 91 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL 3. Month, 01 to 12 (UTC) 4. Year (UTC) 5. Local zone hours, 00h to ±13h 6. Local zone minutes, 00 to +59 (see Note) NOTE: Local time zone is the magnitude of hours plus the magnitude of minutes added, with the sign of local zone hours, to local time to obtain UTC.
  • Page 92 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL S = Simulator mode. The mode indicator should not be a null field. NOTE 2: HDOP calculated using all the satellites (GPS, GLONASS, Galileo and any future satellites) used in computing the solution reported in each GNS sentence.
  • Page 93 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL RMC- Recommended minimum specific GNSS data $--RMC,hhmmss.ss,A,llll.ll,a,yyyyy .yyy,a,x.x,x.x,xxxxxx,x.x,a,a,a*hh<CR><LF> | | | | | | | | | | | | | +-----------------------10 | | | | | +-------------------- 9 | | | +--+------------------ 8...
  • Page 94 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ALF - Alert sentence $--ALF, x, x, x, hhmmss.ss, a, a, a, aaa, x.x, x.x, x.x, x,c---c*hh <CR><LF> | | | | | | | | | | | | | | | |...
  • Page 95 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL NOTE 5: Alert priority: Emergency Alarm: E, for use with Bridge alert management Alarm: Warning: Caution: NOTE 6: The alert state transition is defined in Annex J active – unacknowledged: active – silenced: active – acknowledged or active: A active –...
  • Page 96 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ALC - Cyclic alert list $--ALC, xx, xx, xx, x.x, aaa, x.x, x.x,x.x, .., aaa, x.x, x.x, x.x*hh <CR><LF> +-----------------+----------- 7 +--+-------------------------- 6 | +----+----+--+------------------------------ 5 +---------------------------------------------- 4 +--------------------------------------------- 3 | +------------------------------------------- 2 +------------------------------------------ 1...
  • Page 97 NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL ARC - Alert command refused $--ARC, hhmmss.ss, aaa, x.x, x.x, c*hh <CR><LF> +------------------------------ 5 +---------------------------- 4 +-------------------------- 3 +----------------------- 2 +---------------------1 Time (see Note 1) 2. Manufacturer mnemonic code (see Note 2) 3. Alert identifier (see Note 3) 4.

  • Page 98: Appendix 5 Installation Drawings

    NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL APPENDIX 5 INSTALLATION DRAWINGS NVR-3000 OM.E 20210412-02...

Table of Contents

Save PDF