Clamp Support; Sharpening Your Knife - Work Sharp WSBCHPAJ-PRO User Manual

CLAMP SUPPORT

Use the Clamp Support when sharpening larger knives for additional stability and rigidity.
1
Install onto the Mounting Rail of the Sharpening Base until fully seated.
2
The V-Block Clamp™ will then rest on the Clamp Support.
3
Sharpening Chassis must be tilted back to rotate the knife when using the Clamp Support.
4

SHARPENING YOUR KNIFE

WARNING: Sharpening can be a dangerous task. Be aware of and in full
control of your knife at all times or severe injury or death may occur.
Using light pressure and long strokes, start at the
1
heel of the blade and swipe the abrasive back and
forth while moving along the length of the cutting
edge towards the tip. STOP on the tip of the blade.
WARNING: Do not use excessive pressure when
sharpening. Use light pressure or you risk severe
injury or death.
Continue until you feel a burr along the
2
entire length of the edge (on the opposite
side you are sharpening). Keep an estimate
stroke count so you can evenly sharpen
the other bevel.
Once you have created a burr, stow the
3
Abrasive Handle then carefully rotate
the V-Block Clamp™ 180° to sharpen the
opposite side.
CLAMP SUPPORT | 9