Work Sharp E5 User Manual

UPGRADE KIT
USER GUIDE
THIS KIT
INCLUDES:
EA STERN REC IPE
SHAR P E N S TAGE | D OUBL E CL ICK | 90 S ECO NDS
1. Install 15° E AS T G U IDE S
2. Start with ◼Grey Belt and cycle through SHARPEN stage.
3. Change to ◼White Belt and cycle through SHARPEN stage.
4. Test knife. If not sharp, change to ◼Red Belt and repeat
SHARPEN stage.
5. Repeat steps 2-3.
° WESTERN REC IP E
SHAPE S TAGE | TRIPL E CL ICK | 90 S ECO N DS
1. Install 20° WE S T G UI D ES
2. Start with ◼Red Belt and cycle through SHAPE stage.
3. Change to ◼Grey Belt and cycle through SHAPE stage.
4. Test knife. If not sharp, move to REPAIR AND RESTORE recipe.
CHANGING GUIDES
1. Push back on guide from the front of the sharpener
until the guide snaps out of place.
2. Lift the guide to remove.
3. Place the new guide with the screw into the hole on the sharpener.
4. Push the guide forward toward the front of the sharpener until it
snaps into place. Make sure it is flush with the sharpener.
MASTER BELT KIT
Coarse, (2) Medium, Fine, Extra-Fine
20° WEST GUIDES
FOR EASTERN STYLE KNIVES
MAINTAIN THE EDGE
ONCE OR TWICE
PER WEEK:
Use the ◼White Belt and cycle
through REFINE stage.
FOR WESTERN STYLE KNIVES
MAINTAIN THE EDGE
ONCE OR TWICE
PER WEEK:
Use the ◼Grey Belt and cycle
through REFINE stage.
OFF
15° EAST GUIDES
ON