Work Sharp Guided Field Sharpener 2.2.1 Quick Strat

Only use this sharpener as shown and instructed or you risk injury.
Sharpening is an inherently dangerous activity. This product cannot hurt you but a
carelessly handled blade or pointed object can. Please remain aware of sharp
edges and your hand placement when in use.

QUICK START:

Most knives can be sharpened with the fine diamond plate, the fine
ceramic rod, and the leather strop (if desired). Damaged blades or
angle changes will require the coarse diamond.
Hold the sharpener by the handle to reduce the risk of injury or place
the sharpener on a flat, stable surface. Do not rest the tool on
yourself when in use.
1 // SHAPING & SHARPENING:
2 // HONING:
Rotate the red knob so that the fine
(smooth) surface and "F" on the knob
are up.
Place the side of the knife flat on the
Guide closest to the handle so the cutting
edge is on the rod and
edge away and along the abrasive surface.
Repeat this step using the opposing Guide
PULL
and the knife edge toward and
along the abrasive surface.
5
Alternate for strokes per side.
Use caution when sharpening toward yourself.
3 // STROPPING:
25°
DO NOT PUSH the edge into the strop or you will cut the surface of the leather.
SERRATED EDGES:
Choose the appropriate size ceramic rod
for your serrations. Matching the bevel
angle of the serration, use short
PULL
strokes for each serration. Use
strokes per serration.
MORE
Ceramic Rod
PUSH
the knife
Leather Strop
Large or Small Ceramic Rod
PUSH
3-5
INSTRUCTIONS, TIPS & DEMOS AVAILABLE AT:
WORKSHARPTOOLS.COM
Diamond Plates
Place the side of the knife flat on the
Guide closest to the handle so the
cutting edge is on the abrasive and
PUSH the knife edge away and along
the abrasive surface.
Repeat this step using the opposing Guide
and PULL the knife edge toward and
along the abrasive surface.
5-10
Alternate for
Use caution when sharpening
toward yourself.
Hold the handle so the leather strop is
facing up. Place the side of the blade on
the stropping Guide with the cutting edge
facing down and away from the leather.
PUSH
the backside of the knife up the
guide surface then onto and across the
leather strop. Repeat this step using the
opposing Guide and a
Perform 10 alternating strokes. Use caution
when stropping your blade.
&
OR
strokes per side.
PULL
motion.
(800)597-6170