Serration Sharpening; Small Knife Sharpening - Work Sharp WSBCHPAJ-PRO User Manual

SERRATION SHARPENING

Hold the knife in your hand, with the serrations face up.
1
Remove the Abrasive Handle and Sharpening Rod from the Sharpening Chassis.
2
Place the round Ceramic Rod into one of the serrations so it matches the angle.
3
Using light pressure, swipe the ceramic rod back-and-forth inside the serration for 8-10 strokes. Repeat for
4
each serration.
Turn the knife over and lightly hone the back of the serrations with the ceramic rod to remove any burr that may
5
have been created.

SMALL KNIFE SHARPENING:

PEN KNIVES AND SMALL MULTI-
BLADE FOLDERS
GET TO KNOW YOUR SMALL KNIFE
SHARPENING TABLE
Table Chassis
1
Mounting Slot
2
Blade Support Bar Adjustment Knob
3
Fine Tune Support Magnet
4
Fine Tune Adjustment Knob
5
Blade Support Bar
6
7 Blade Position Reference Marks
5
4
1
6
7
3
2
SERRATION SHARPENING | 11