Quick Reference - Supermicro AS -1024US-TRT User Manual

Quick Reference

Jumper Description
JBT1 CMOS Clear
JWD1 Watch Dog
Connector Description
JIPMB1 4-pin External I
BT1 Onboard Battery
VGA VGA Port
UID_SW UID Switch
COM1 COM Port
BMC_LAN LAN port to access the BMC
USB0/1 (3.0) USB0/1 (3.0) Rear Side Connector
USB3/4 (3.0) USB3/4 (3.0) Front Side Pin Header
USB2 (3.0) USB2 (3.0) Type A Connector
FAN1~FAN8 4-pin System/CPU Fan Headers
JCPLD1 Complex-Programmable Logical Device (CPLD) header
FP1 Front Panel Connector
JF1 Front Control Panel Header 1
P1_NVME0/1 SATA0-7 Processor 1 NVMe Ports 0/1 / SATA 0~7
P1_NVME2/3 Processor 1 NVMe Ports 2/3
P2_NVME0/1 SATA10-17 Processor 2 NVMe Ports 0/1 / SATA 10~17
P2_NVME2/3 Processor 2 NVMe Ports 2/3
SATA8~9 SATA 3.0 Ports
JSD1-2 Disk-On-Module Power Connector
JNCSI1 NCSI
JL1 Chassis Intrusion Header
JSEN1 Inlet Sensor Header
GPU PWR1-3 12V 8-pin Power Connector for Riser Card GPU
BP PWR1-4 12V and 5V 8-pin Power Connector for Backplane
JTPM1 Trusted Platform Module/Port 80 Connector
PSU1/PSU2 Motherboard Main Power Supply Connector
SXB1A/1B/1C WIO-L Riser Card Support (CPU2 PCIe 4.0 x32)
SXB2 WIO-R Riser Card Support (CPU2 PCIe 4.0 x16)
SXB3A/3B/3C Ultra I/O Riser Card Support (CPU1 PCIe 4.0 x40)
LED Description
UID_LED UID LED
BMC_HB LED BMC Heartbeat LED
PWROK LED Power LED
C Header (for an IPMI card)
2
State: Status
Solid Blue: UID Switch On
Green: Blinking (BMC normal)
Green: Fast blinking (BMC initializing)
Solid Green: Power On
15
Chapter 1: Introduction
Default Setting
Open (Normal)
Pins 1-2 (Reset)