Supermicro AS -1024US-TRT User Manual page 53

TPM Header/Port 80 Connector
The JTPM1 header is used to connect a Trusted Platform Module (TPM), which is available
from Supermicro. A TPM is a security device that supports encryption and authentication in
hard drives. It enables the motherboard to deny access if the TPM associated with the hard
drive is not installed in the system.
For more information on TPM: https://www.supermicro.com/manuals/other/TPM.pdf.
IPMB System Management Bus Header
A System Management Bus header for IPMI 2.0 is located at JIPMB1. Connect the appropriate
cable here to use the IPMB I
System Thermal Sensor Header
A System Thermal Sensor header for IPMI 2.0 is located at JSEN1. Connect the appropriate
cable here to use the thermal sensor I
Trusted Platform Module Header
Pin Definitions
Pin# Definition Pin#
1 LCLK 2
3 LFRAME# 4
5 LRESET# 6
7 LAD3 8
9 3.3V 10
11 LAD0 12
13 SMB_CLK4 (X) 14
15 P3V3_STBY 16
17 GND 18
19 P3V3_STBY 20
C connection on your system.
2
IPMB Header
Pin Definitions
Pin# Definition
1 Data
2 Ground
3 Clock
4 No Connection
C connection on your system.
2
JSEN1 Header
Pin Definitions
Pin# Definition
1 Data
2 Ground
3 Clock
4 3.3V_Standby
53
Chapter 4: Motherboard Connections
Definition
GND
No Pin
NC
LAD2
LAD1
GND
SMB_DAT4 (X)
SERIRQ
LP_CLKRUN_L
LDRQ0_L