Table of Contents
Advertisement
PORTABLE WELDING TABLE
SAFETY
SAFETY PRECAUTIONS
WARNING
Do not attempt to use this equipment until you have
thoroughly read all operating and maintenance manuals
supplied with your machine. They include important safety
precautions, operating and maintenance instructions and
parts lists.
FIRE OR EXPLOSION hazard
•
Only use table for recommended
applications.
FALLING EQUIPMENT can injure.
•
i.
Do not exceed maximum weight of
table. Evenly distribute load on surface.
•
ii.
Do not stand, sit, or climb on table.
•
iii. Do no use table on uneven surface
where it can be tipped over.
•
iv. If table is to be used on an incline,
adjust leg height so table top is even.
•
v.
Keep equipment and parts away from
edges of the table to prevent falling objects.
MOVING PARTS can injure.
•
Keep away from moving parts.
•
Keep away from pinch points such as
drive rolls.
------------------------------------------------------------------
service this equipment.
WARNING
ELECTRIC SHOCK can kill.
•
Do not touch electrically live parts such as
output terminals or internal wiring.
•
Insulate yourself from the work and
ground.
•
Always wear dry insulating gloves.
SETTING UP TABLE
To ensure proper setup of the portable welding table:
•
Insert locking pins in each leg (shipped loose).
•
Ensure table is level with all leg locking pins engaged prior to
•
using.
PORTABLE WELDING TABLE BEST PRACTICES
The following guidelines will ensure proper usage of the portable
welding table:
Do not exceed maximum weight of table. Evenly distribute
•
load on surface.
Do no use table on uneven surface where it can be tipped
•
over.
If table is to be used on an incline, adjust leg height so table
•
top is even.
Keep equipment and parts away from edges of the table to
•
prevent falling objects.
Inspect table before every use to ensure it has no loose
•
parts and is in good working condition. Check for loose
bolts, partially engaged legs pins, or any damage.
Tighten nuts to proper torque.
•
Use the supplied earth grounding bolt to connect the
•
welding table to a good electrical ground according to
national, state, and local codes.
Lifting And Transporting Table
NOTE: Portable welding table REQUIRES TWO PERSON LIFT.
•
properly secured prior to carrying.
Remove all items off table surface prior to folding/moving.
•
Ensure there is a clear pathway before moving transporting
•
table.
DO NOT drop table.
•
WARNING
HOT PARTS can burn.
•
Do not touch hot parts bare handed.
•
Allow cooling period before working on
equipment.
•
To handle hot parts, use proper tools
and/or wear heavy, insulated welding gloves
and clothing to prevent burns.
2
SAFETY
Advertisement
Table of Contents
