OM4064 06/11
Lubrication and Service
10,000 HOUR LUBRICATION AND MAINTENANCE CHECKS
Truck Serial Number______________________
Hourmeter_____________
1.
WHEEL MOTORS - Clean the area around the
grease ports to prevent dirt or other contaminates
from entering. Remove the six grease port plugs on
each wheel motor. Grease the inboard and outboard
wheel hub bearings with one 414 mL (14 oz) cartridge
per each grease port.
2.
BLEED-DOWN MANIFOLD CHECK VALVE -
Replace bleed-down manifold check valve. Refer to
Bleed-Down Manifold Valve in Section L of the shop
manual for additional information.
Complete the 10, 50, 100, 250, 500, 1000, 2500, and 5000 hour lubrication and maintenance checks.
Site Unit Number_______________
Name of Service Technician___________________________________
TASK
Maintenance - Section 40
Date_______________
COMMENTS
CHECKED INITIALS
Page 40-17