Setting The Date / Time - Concord Camera Eye-Q 5330z User Manual

SETTING THE DATE / TIME

When taking a picture, the date and time are recorded as the part of the image information. If the
built-in clock of this camera is not set correctly, the wrong date and time ate recorded. Set the date
and time correctly by performing the procedure below.
1 1 Rotate the function dial to "SETUP" and slide the power
switch to turn on the camera.
• The power switch returns to the initial position.
• The setup mode menu is displayed on the LCD monitor as shown in the
figure.
2 2 Press the or
and press the
• The display to set the date and time appears as shown in the figure.
3 3 Press the
or
press the key.
key so that [DATE/TIME] is highlighted
key.
key so that [DATE] is highlighted and
121