Checking The Battery; Setting The Time And Date - Concord Camera Eye-Q 3X Instruction Manual

GETTING STARTED (CONTINUED)

CHECKING THE BATTERY

The camera has a battery indicator that shows the current battery
level, regardless of the mode the camera is in.
FULL
Battery has full
power and is ready
to use.
Do not attempt to use the camera once the "Empty" battery indicator
appears in the display. Replace the battery immediately in this case. It is a
good idea to always keep a spare battery together with your camera kit.

SETTING THE TIME AND DATE

1
+
A
–
CAMERA
Turn your camera on by pressing
the CAMERA/REVIEW/Power button
❶ and make sure it is in the
CAMERA mode (mode arrow will
point to the word CAMERA). If it is
not, press the CAMERA/REVIEW/
Power button ❶ again so the mode
arrow points to the word CAMERA.
Battery has low
power and will need
to be replaced soon.
REVIEW
1
LOW
2
2
+
2
–
Press and hold the Self-Timer
button ❶ for 5 seconds to enter
the Clock Set mode; the 12/24
hour setting will start blinking.
Press the Zoom In/Up + + or Zoom
Out/Down – – button ❷ to cycle
between the 12 or 24 hour mode.
8
EMPTY
Battery has very little
power and must be
replaced.
1
A
CAMERA REVIEW