Setting The Language, Date And Time - Concord Camera Eye-Q 4360z User Manual

GETTING STARTED

SETTING THE LANGUAGE, DATE AND TIME

When the camera is powered on for the first time, the Language, Date and Time
menus will appear.
Setting the Language
1. Turn the camera on.
• The Language Setup screen will appear on the LCD.
2. Press to highlight the language you would like to use.
3. Press to select.
4. The next screen will read "Are You Sure?" press
5. Press to confirm the selection.
• If you select No, you will return to the Language select screen.
• If you select Yes, all menu screens will be displayed in the new language.
Each language will set the default setting for date format and TV option. To
change these settings, please refer to the Customizing the Camera Settings
section on page 33.
Language(s)
English / Español
Français / Deutsch,
Italiano / Nederlands
Setting the Date
ADJUST DATE
01 ⁄ 01 ⁄ 2003
MM ⁄ DD ⁄ YYYY
RETURN SET
OK
1. Press to change the number in the blinking position until you reach the desired setting.
2. Press to highlight the month, day or year.
• The selection will blink when it is highlighted.
3. Repeat steps 1 and 2 until the date is set.
4. Press to set the date.
Note:
• If the battery is removed or dead for more than 4 minutes, the date will return to its default setting.
to select No or Yes.
Date Format Setting
MM/DD/YYYY
DD/MM/YYYY
YYYY/MM/DD
ADJUST DATE
01 ⁄ 01 ⁄ 2003
MM ⁄ DD ⁄ YYYY
RETURN SET
OK
7
LANGUAGE OPTION
English
Français
Español
Deutsch
Italiano
RETURN SET
OK
LANGUAGE OPTION
Nederlands
RETURN SET
OK
TV Option
NTSC
PAL
PAL
ADJUST DATE
01 ⁄ 02 ⁄ 2003
MM ⁄ DD ⁄ YYYY
RETURN OK SET