Loading The Batteries - Concord Camera 5345z User Manual

LOADING THE BATTERIES

Before taking pictures, insert two (2) "AA" batteries into your camera's battery
compartment, as follows:
1. Open the battery compartment by pushing the tab in as in Figure 1.
2. Insert two (2) "AA" batteries into the battery compartment, observing the
polarity marks (+ / -) as indicated in Figure 2 .
3. Close the battery compartment until it clicks.
NOTE: Batteries will need replacing when the Battery indicator blinks in the
display.
FIGURE 1
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as
indicated in the battery compartment. Reversed batteries may cause
damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and
Carbon-Zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries
to prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can
overheat and rupture. (Follow battery manufacturer's directions.)
GETTING STARTED
BATTERY PRECAUTIONS
12
–
+
+
–
FIGURE 2