GET READY
ATTACHING THE HAND STRAP
1 1 Insert the smaller loop of the hand strap through the strap
eyelet.
2 2 Insert the other end of the hand strap through the small
loop.
GETTING STARTED
1 1 Insert the batteries .
Be sure that positive and negative battery terminals are oriented as illustrated
on bottom of the back cover.
2 2 Insert the CF card .
• Be sure to fold the card-release lever down before closing the card slot door.
• Check the direction if the card is stopped halfway.
Note: We advised to use SanDisk ® or HITACHI ® CF card.
9
Need help?
Do you have a question about the Eye-Q 5330z and is the answer not in the manual?