GETTING STARTED (CONTINUED)
TURNING THE CAMERA ON AND OFF
•
To turn your camera on, press the POWER
button
; the LCD screen will turn on and two
beeps will be heard.
•
To turn your camera off, press the POWER
button
again; the LCD screen will turn
blank.
SPECIAL NOTE ON TURNING YOUR CAMERA OFF: While the camera is
processing your pictures, pressing the power button will not shut down the
camera immediately. The camera will shut down automatically when it has
finished processing.
STANDBY: To save the batteries, when no button is pressed within 60
seconds, the unit will enter the Standby mode (LCD will turn off); images will
be stored in memory.
BUILT-IN MEMORY/INSERTING A COMPACTFLASH
Your camera comes with 8MB of internal memory, of which 2MB are used for
storing images. If this is not enough, you can insert a CompactFlash
memory card (not included), up to a maximum of 64MB. CompactFlash
memory cards are available at all good computer and camera retailers. To
insert, follow the instructions below:
1
Using your fingernail, open the
TM
CompactFlash
on the side of your camera and insert
the memory card all the way into the
compartment as shown above. The
card will only fit in the compartment
one way.
Card Compartment
TM
2
To eject the card, open the
CompactFlash
Compartment and then press the
EJECT button
13
1
MEMORY CARD
TM
TM
Card
as shown above.
TM
Need help?
Do you have a question about the 5345z and is the answer not in the manual?