Taking Video Clips; Taking Audio Clips - Concord Camera 5040 User Manual

TAKING VIDEO CLIPS / AUDIO CLIPS
3. Press or to set the desired white balance mode then press the SET button to confirm.

TAKING VIDEO CLIPS

The digital camera can shoot video clips with audio.
1. Press the MODE button repeatedly until the video mode icon (
• The LCD monitor displays the maximum recordable time (in minute).
2. Press the Shutter button to start recording.
3. Press the shutter button again to stop recording. Otherwise the camera stops recording automatically when
the memory capacity is reached.
Note:
1. Be careful not to touch the microphone which is located at the top side of the camera while
recording video or audio clips.
2. The Video resolution can be set to 640 x 480 or 320 x 240 pixels.
3. The Self-Timer and Macro mode shooting can be activated in Video Mode.
4. The Image Quality, Exposure compensation and White Balance can be adjusted before recording
video clip.

TAKING AUDIO CLIPS

You can use the camera as an audio recorder.
1. Press the MODE button repeatedly until the voice mode icon (
2. Press the Shutter button to start recording an audio clip. The green Operation Lamp will blink.
3. Press the Shutter button again to stop recording. Otherwise, it will stop automatically after the memory
limit isreached.
2592 x1944
Recordable time
Recordable time
) appears on the LCD.
Recording time
) appears on the LCD.
Recording time
Recording time
17