Setting Up Serial Printing (Windows Only) - Lexmark CX737 User Manual

Set up, install, and configure
Deactivating the Wi‑Fi network
1
From the home screen, touch Settings > Network/Ports > Network Overview > Active Adapter > Standard
Network.
2
Follow the instructions on the display.
Checking the printer connectivity
1
From the home screen, touch Settings > Reports > Network > Network Setup Page.
2
Check the first section of the network setup page, and confirm that the status is connected.
If the status is not connected, then the LAN drop may be inactive, or the network cable may be
malfunctioning. Contact your administrator for assistance.

Setting up serial printing (Windows only)

Before you begin, make sure that a serial internal solutions port is installed in your printer.
1
Set the parameters in the printer.
a
From the control panel, navigate to the menu for the port settings.
b
Locate the menu for the serial port settings, and then adjust the settings, if necessary.
c
Apply the changes.
2
From your computer, open the printers folder, and then select your printer.
3
Open the printer properties, and then select the COM port from the list.
4
Set the COM port parameters in Device Manager.
Notes:
•
Serial printing reduces printing speed.
•
Make sure that the serial cable is connected to the serial port on your printer.
99