Hisense E6431C Instructions For Use Manual page 30

Connecting the power cord
(appliance with a power cord)
• The appliance has to be hard-wired directly to the power mains.
• Devices for disconnecting from the power mains have to comply with the relevant regulations.
• Do not extend the power cord and do not lead it over sharp edges.
• If the appliance is installed above an oven, make sure the power cord is never in contact with the
oven's hot parts.
Single-phase connection
Connect the appliance as shown in Diagram A. If your power mains do not allow a 32 A fuse, the
appliance power should be decreased or limited accordingly.
See chapter User Settings.
Two-phase connection
• If your electric mains have 2 line conductors and 1 neutral conductor, connect the appliance as
shown in Diagram B.
• If your electric mains have 2 line conductors and 2 neutral conductors, connect the appliance as
shown in Diagram C.
L1 = brown
L2 = black
N = blue
= yellow/green
30
L = brown
N = blue
= yellow/green
L1 = brown
L2 = black
N1 = blue
N2 = grey
= yellow/green
only for NL!