Touchboards InVision 37108 Assembly Instructions

Assembly Instructions Assembly Instructions
To purchase parts or accessories, please contact us at
www.spectrumfurniture.com
1-800-235-1262
Thank you for purchasing Spectrum products!
Before you begin, please make sure all parts and proper quanti-
ties are included. Any parts damaged during shipment must be
reported within 15 days of receipt. To report information regarding
damages or if you have any questions, please call 1-800-235-1262.
(1) 0112504 (1) 0112503
shelf bracket 12"W x 8-1/2"D shelf
(4) 059534 (4) 026059
1/4-20 x 30mm 1/4 fl at washer
JC bolt
The Invision camera mount comes with two different shelf sizes to ac-
commodate multiple camera and video devices. The mount can also be
located in two different positions: above the monitor for group teleconfer-
encing, or below the monitor for face-to-face conferencing.
1. Camera mount assembly 1. Camera mount assembly
A. Choose one shelf (large or small) that fi ts your specifi c camera.
B. Attach the bracket to the shelf as shown with (2) 1/4-20 locknuts
and tighten securely. Figure 1.
(1) 0112502
6-1/2"W x 8-1/2"D shelf
(6) 041943 (1) 025039
1/4-20 locknut 4mm hex wrench
Camera Mount for InVision Camera Mount for InVision
Media Collaboration Table Media Collaboration Table
shelf bracket
1/4-20 locknut
Figure 1
™ ™
#37108 #37108
4mm hex wrench
7/16" or adjustable wrench
drill with 3/8" drill bit
(2 req'd)
large or small
shelf
0112774 Page 1 of 4
(included)