Touchboards PANA-103MTV Installation And Assembly

Mount for panasonic th-103pf12u, th-103ph9uk, th-103vx200u and th-103pb1u

Download this manual

Installation and Assembly:

Mount

for Panasonic TH-103PF12U, TH-103PH9UK, TH-103VX200U and

Mount

Mount for Panasonic TH-103PF12U, TH-103PH9UK, TH-103VX200U and

Mount

for Panasonic TH-103PF12U, TH-103PH9UK, TH-103VX200U and

TH-103PB1U

Model: PANA-103MTV

2300 White Oak Circle. • Aroura, IL 60502 • (800) 856-2112 • www.peerlessmounts.com

Max Load Capacity: 500 lb (227 kg)

ISSUED: 10-18-06 SHEET #: 202-9172-4 08-14-14

Page 1 Panasonic TH-103PF12U, TH-103PH9UK, TH-103VX200U and for Panasonic TH-103PF12U, TH-103PH9UK, TH-103VX200U and TH-103PB1U TH-103PB1U TH-103PB1U TH-103PB1U TH-103PB1U Model: PANA-103MTV Max Load Capacity: 500 lb (227 kg) 2300 White Oak Circle. • Aroura, IL 60502 • (800) 856-2112 • www.peerlessmounts.com ISSUED: 10-18-06 SHEET #: 202-9172-4 08-14-14...
Page 2 Note: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your Panasonic product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Panasonic Customer Support.
Page 3 Installation to Wall WARNING • Installer must verify that the supporting surface will safely support four times the combined weight of all attached equipment and hardware. • Only meant for surface mounting to the desired wall, recessed mounting or any other application please contact customer care.
Page 4 Slide keyhole slots of tilt plates (B) onto spacers provided with screen. Secure tilt plates (B) to screen by using eight M5 x 6 mm screws (G) to attach four locking tabs (C) to keyhole slots as shown in Detail 1. DETAIL 1 Attach clevis pin to wall plates (A) using two Set tilt plate (B) to desired tilt shown in detail 2.