Advertisement
Quick Links
Advertisement
Related Manuals for Touchboards peerless-AV PRS-KIT0811
Summary of Contents for Touchboards peerless-AV PRS-KIT0811
- Page 1 Installation and Assembly Model: PRS-KIT0811, PRS-KIT1420, PRS-KIT2026 Max UL Load Capacity: 25 lb (11.3 kg) 2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerlessmounts.com ISSUED: 06-02-05 SHEET #: 054-9124-11 01-27-12...
-
Page 2: Table Of Contents
Note: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact your local distributor. -
Page 3: Parts List
Before you begin, make sure all parts shown are included with your product. Parts List PRS-KIT0811 PRS-KIT1420 PRS-KIT2026 Description Qty. Part # Part # Part # A extension tube 154-1099 154-1100 154-1101 B adjuster tube 154-1095 154-1096 154-1096 C M8 x 10 mm phillips screw 520-1605 520-1605 520-1605... -
Page 4: Installation To Wood Joist Finished Ceilings, Exposed Wood Joists, Or Wood Beam Ceilings
Installation to Wood Joist Finished Ceilings, Exposed Wood Joists, or Wood Beam Ceilings Drill two 5/32" (4mm) dia. holes to a minimum depth of 2.5" (64mm). Attach ceiling plate (E) with two #14 x 2.5" (6mm x 65mm) wood screws (I) as shown using a 3/8" (10mm) socket wrench. Tighten wood screws (I) so ceiling plate (E) is fi... -
Page 5: Installation To Concrete Ceilings
Installation to Concrete Ceilings WARNING • Concrete must be 2000 psi density minimum. Lighter density concrete may not hold concrete anchor. • Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. -
Page 6: Installation Of Extension/Adjuster Tube Assembly
Installation of Extension/Adjuster Tube Assembly Thread adjuster tube (B) into threaded fi tting on ceiling plate (E) as shown in fi gure 2.1. Tighten securely aligning slot in end of adjuster tube (B) with one of the holes in the side of threaded fi tting on ceiling plate (E). -
Page 7: Installation To Extension Column
Installation to Extension Column Screw projector mount assembly (F) onto extension tube (A). Tighten swivel stop screw against extension tube using t-wrench (K). NOTE: The swivel stop screw is used to jam against threads of extension tube (A) to prevent any excess movement of projector mount assembly (F). -
Page 8: Installation Of Projector
Attach adapter plate (G) to projector using one screw (M, N, O or P) for each channel as shown below. Tighten all screws, while keeping the center of gravity. Be sure that adapter plate (G) is straight. Adjust the feet of the channels to keep the adapter plate level. -
Page 9: Projector Alignment
IMPORTANT: For security installations, insert one #10-32 x 1/4" socket pin screw (L) through projector mount as- sembly (F) and into connection block as shown. CONNECTION BLOCK Projector Alignment To adjust yaw (swivel): Loosen screw on projector mount assembly (F) indicated below until projector mount can be rotated. - Page 10 LIMITED FIVE-YEAR WARRANTY Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless® products will be free from defects in material and workmanship, under normal use, for a period of fi ve years from the date of purchase by the original end-user (but in no case longer than six years after the date of the product’s manufacture). At its option, Peerless will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.