Related Manuals for Touchboards PM2-S-XL
Summary of Contents for Touchboards PM2-S-XL
- Page 1 Mount PM2-S-XL Assembly Instructions www.video-furn.com 288 Don Hillock Drive |Aurora |Ontario|L4G 0G9 | 1.877.834.3876 v1.0...
-
Page 2: Tools Required
Parts Included TV Brackets w M8 Bolts Camera Neck Main Pillar Base Base washer Wide camera plate Tube Locker 2x1x45” TUBE TV VESA patterns up to 1100mm x 650mm Max TV Weight 200 lbs. Hardware Included M8x12mm M6x10mm 10-32 SHCS Bolt SHCS Bolt TV 52-70 HW Bag... - Page 3 Step 1 -Center Base approx. 2” from back of furniture. Preferably over grommet. -Check position from underneath/inside unit for interference. -Using Base as Jig, Drill 10mm or 13/32” holes. Some AVFI carts are predrilled. -Use a 2” hole saw or Jigsaw to open center hole/cable passage in furniture. Step 2 Holes at Attach main pillar...
- Page 4 Assembly Instructions Step 3 Tube Locker Insert Tube and lock. M8x12mm SHCS Bolt Step 4 Attach brackets to TV Using Hardware found in: TV 52-70 HW Bag TV VESA patterns up to 1100mm x 650mm Max TV Weight 200 lbs. 288 Don Hillock Drive |Aurora |Ontario|L4G 0G9 | www.video-furn.com 1.877.834.3876...
- Page 5 Assembly Instructions Step 5 Hang TV on mount. Adjust height if Required. See step3. M8 Bolts already On bracket Step 6 Attach camera mount 10-32 M6x10mm SHCS Bolt Use camera bag to attach camera. 288 Don Hillock Drive |Aurora |Ontario|L4G 0G9 | www.video-furn.com 1.877.834.3876...
- Page 6 Assembly Instructions Step 7 Cable management and accessories Most Cable Management should be run through the pillar down into the furniture. The grommet on the bottom back is removable to help guide the cables. Most Accessories will center mount On the back of the Pillar using the extra M6 bolt.