Panasonic AW-PH500 Operating Instructions Manual page 9

Attaching the pan/tilt head
(Be absolutely sure to ask your dealer to do this work.)
¥ Attaching the AW-F575
Use the WV-QT700 tripod stand to attach the AW-F575 camera.
<Note>
When attaching a camera other than the AW-F575, check its weight and dimensions to confirm whether it can be attached.
≥Attaching the tripod stand
Place the WV-QT700 tripod stand on the arm, and anchor
it from below using the two screws supplied with the
pan/tilt head. Be sure to use both flat and spring washers
when anchoring the tripod stand.
<Note>
Use a screwdriver or other such tool to secure the
screws firmly.
≥Attaching the AW-F575 camera
1.
While pushing the lock knob on the tripod stand,
move the lock lever in the direction of the arrow.
2.
Insert the catch at the rear of the camera into the
groove on the tripod stand.
3.
Place the camera proper on the tripod stand.
4.
When the lock lever of the tripod stand is moved in
the direction of the arrow, the camera proper is slid
toward the rear and anchored.
Flat washers
Spring washers
9