∫When using the RS-232C interface to control the pan/tilt
Lens zoom/focus cable
≥The camera cannot be controlled using the RS-232C interface.
¥ Connections with the PC
Shown below are the connections for the RS-232C cable from the PC and for the cable from the pan/tilt head when control is
to be exercised using the RS-232C interface.
To the pan/tilt head pan-tilt
control connector (24-pin)
≥ Keep the length of the cable between the pan/tilt head and PC to less than 15 meters.
To extend the cable to a length exceeding 15 meters, convert the interface from RS-232C to RS-422 for sending, and
convert it back to RS-232C at the receiving end.
≥ Use a crossover cable between the pan/tilt head and PC.
Video camera control cable
AW-CA16U10 (10 meters)
AW-CA16U20 (20 meters)
AW-CA16U30 (30 meters)
Pan/tilt head control cable
AW-CA24U10 (10 meters)
(5C-2V coaxial cable)
PC 9-pin D-sub
Ra a D
Ta a D