Download Print this page
Panasonic AY-PB2003 Operating Instructions Manual
Panasonic AY-PB2003 Operating Instructions Manual

Panasonic AY-PB2003 Operating Instructions Manual

Professional jog pad rom kit

Advertisement

Quick Links

PROFESSIONAL JOG PAD
ROM KIT
AY-PB2003
Before attempting to connect or operate this product,
please read these instructions carefully.

Advertisement

loading

Summary of Contents for Panasonic AY-PB2003

  • Page 1 PROFESSIONAL JOG PAD ROM KIT AY-PB2003 Before attempting to connect or operate this product, please read these instructions carefully.
  • Page 2 For U.S.A NOTE: This equipment has been tested and found to com- ply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro- CAUTION vide reasonable protection against harmful interference RISK OF ELECTRIC SHOCK when the equipment is operated in a commercial environ- DO NOT OPEN...
  • Page 3 PREFACE Important The ROM in this package is for exclusive use with the • Before replacing the ROM, be sure to press the professional jog pad in the non-linear workstation WJ- power switch off and pull out the power plug MX1000 and WJ-MX1200 series.
  • Page 4: Board Removal

    BOARD REMOVAL q Quit system operation, switch power off, and pull e Loosen the screws and remove the protective out the power plug from the electrical outlet. Be cover. Be careful not to loose the screws. sure to read the Installation Manual for the Main Kit r Remove the second board from the bottom (input (WJ-MX1000 and WJ-MX1200 series) for how to board).
  • Page 5 Replacing the ROM t With the shielding plate down, place the removed There is the danger of damaging the ROM if the input board on an antistatic mat or the like, and remover is not fully inserted. remove the ROM from the input board. [How to Use Remover] Caution: Insert the hooks at the ends of the remover all Insert the hooks at the ends of the remover into the two...
  • Page 6: Board Mounting

    y Place a new ROM in the socket. Check the direc- BOARD MOUNTING tion of the mark for pin 1 so that the ROM will be u Pull the board tabs toward yourself and insert the inserted in the correct direction, keep the ROM removed board into its original position.
  • Page 7 Accessories Remover ..............1 Warranty ..............1...
  • Page 8 Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Mid-Atlantic: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160 Suwanee, GA 30024...