Operating Instructions/Mode d’emploi/ Instrucciones de funcionamiento Base Station/Station de base/Estación Base AG-BS300P Model No. AG-BS300E Model No. Before operating this product, please read the instructions carefully and save this manual for future use. Avant de vous servir de ce produit, veuillez lire attentivement les instructions et enregistrer ce manuel pour une utilisation ultérieure.
AC plug. any doubt about the effective grounding of the Please contact either a local or foreign power outlet, please consult a qualified Panasonic authorized service center for electrician. assistance in selecting an alternate AC plug. indicates safety information.
Read this first ! (continued) For AG-BS300P IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.
Read this first ! (continued) For AG-BS300E indicates safety information.
Read this first ! (continued) For AG-BS300E WARNING: CAUTION: THIS EQUIPMENT MUST BE EARTHED. In order to maintain adequate ventilation, do To ensure safe operation, the three-pin plug not install or place this unit in a bookcase, must be inserted only into a standard three-pin built-in cabinet or any other confined space.
Read this first ! (continued) For AG-BS300E EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS 1. Applicable standards and operating environment (AG-BS300E) The apparatus is compliant with: standards EN55103-1 and EN550103-2 1996.11, and electromagnetic environments E1, E2, E3, and E4. 2.
Part Names and Functions ........10 Specifications............18 Front Panel ..............10 Rear Panel ..............11 Supplied Accessories AC cable (AG-BS300P)..............1 AC cables (AG-BS300E) ..............2 Features This unit has the following features: By connecting this unit with the camera adapter (AG-CA300) via...
Precautions When Connecting the System Take caution with the following when connecting the camcorder and this unit. Use the recommended power cable. (Refer to page 13) Use the 5C-FW for the BNC cable. Maximum extension distance of 100 m cannot be achieved if any other cable is used. When confirming the RET signal on the camera adapter by inputting the RET signal into this unit, the image on the viewfinder (LCD monitor) may be interrupted for an instant at the moment...
System Configuration Diagram SDI OUT VF/return video VIDEO OUT (Composite signal) Intercom tally BT-LH80 Dedicated cable (monitor video, GPI) Return (SDI) Return Use 5C-FW (Composite (Maximum extension signal) SD I IN OC K length: 100 m) GE NL OU T GENLOCK RE T OU RC cable...
Part Names and Functions Front Panel PUSH OPERATE INCOM INCOM TALLY/CALL MENU LEVEL POWER Base Station AG-BS300 1. POWER switch 2. POWER lamp This indicates that the main power supply (AC power supply) is turned on. 3. OPERATE lamp This indicates that this unit is operating. This is turned on while this unit is operating with an external DC input.
Part Names and Functions (continued) Rear Panel REMOTE DC 12V IN AC IN DC 24V OUT GEN LOCK VIDEO RET IN SDI OUT INCOM/ TALLY VIDEO TALLY INCOM MAKE VIDEO 14 15 DC 24V OUT terminal 10. SDI 2 output terminal DC 24 V is output while this unit is operating with the AC power This will output the SDI signal that was output from the supply.
Part Names and Functions (continued) 16. DC 12V IN terminal 18. Cable hook External DC power supply is connected when operating this This is used to prevent the power supply cable slipping off. unit with DC. Use a power supply with a capacity of DC 12 V 3 A or higher.
About the Power Supply Cable Use the power supply cable with the following specifications with this unit. The extension length of 100 m cannot be maintained between the base station (AG-BS300) and the camera adapter (AG-CA300) especially if the resistance value is larger than the following specifications. (NAC3FCA) (UL48897, AWM2517, 300 V, 105 °C, VW-1) (NAC3FCB)
Menu Display This unit can display the setting menu on the VIDEO OUT terminal, the SDI OUT1 terminal, and the SDI OUT2 terminal on the rear panel. Basic structure of the menu Menu setting is operated with the MENU switch and the SEL switch GENLOCK (JOG dial button).
List of Menus <SYSTEM> Item / Data Saved Variable Range Note FORMAT Displays the format used in this unit. 1080-59.94i Status display only. 1080-23.98PsF This cannot be changed by the menu. 1080-24PsF 1080-50i CAMERA VF Set the format of the CRT viewfinder used on the camcorder. HD format viewfinder SD format viewfinder <GENLOCK>...
List of Menus (continued) <DOWNCON SETTING> Item / Data Saved Variable Range Note MODE SQUEEZE Set the mode for the composite signal output from the VIDEO OUT terminal. S-CROP SQUEEZE: Video will be squeezed horizontally. LT-BOX S-CROP: Video will be cropped on both sides. LT-BOX: Video will be squeezed vertically.
Connector Signals Panasonic part number Panasonic part number INCOM DC OUT K1AB105H0003 K2A93H000005 DC24 V Manufacturer part number Manufacturer part number HA16PRH-5S INCOM TALK NAC3MPB (Hirose Denki) ( Neutrik) INCOM RECEIVE Cable side connector INCOM RECEIVE Manufacturer part number NAC3FCB...
Specifications [General] [Analog Signal Output Unit] VIDEO OUT Input: AC 100 - 240 V, 50/60 Hz, 1.6 A - 0.6 A : BNC DC 12 V, 1.1 A : VBS, 1 Vp-p, 75 Ω Output: DC 24 V, 4 A DC 13 V, 0.3 A GENLOCK OUT (GENLOCK IN and loop through) : BNC...
Panasonic Broadcast & Television Systems Company Unit Company of Panasonic Corporation of North America Executive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 Tel: 201-348-7000 Eastern Zone: One Panasonic Way 4E-7, Secaucus, NJ 07094 Tel: 201-348-7196 Southeast Region: Tel: 201-392-6151 Western Zone: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 Tel: 323-436-3608...