Table of Contents
Advertisement
Installation
IMPORTANT: Turning off the power of the NEC
Express server and the power unit of the Device
Expansion Unit before connecting the SAS interface
cable. Connecting the SAS interface cable with either or
both of the power of the NEC Express server and the
power unit of the Device Expansion Unit being on may
cause some malfunction or failure.
1. See the section "Preparing for Installation and Removal" to prepare.(See page 26)
2. Engage the connectors of SAS cables with the SAS connectors on the rear face of
the Device Expansion Unit.
3. Lock the connector by inserting a SAS cable.
- 42 -
Advertisement
Table of Contents
