Table of Contents
Advertisement
NOTE: If the unit is locked on the way, check the state
of the lock lever at the center of the rail. If the lever is
locked, move the lever to the level to release the lock
and then insert the inner rails.
In the first installation, you may feel strong friction when pushing the unit because
mechanical components do not sufficiently mate with each other. Push the unit
strongly.
8. Pull out or push the unit from or into the rack for several times to confirm that the
slides are moved smoothly.
9. Fix the unit to the rack with the setscrews at both sides of the front surface.
Now the procedure is completed.
Bearing rail
Release lever
- 17 -
Plastic guide
Inner rail
Advertisement
Table of Contents
