Table of Contents
Advertisement
6. Connect the DC power cable to the power input (redundant) connector (E) on the
power backboard.
7. Check the connections in the device and install the top cover.
(For more information about connecting the interface and power cables, please
refer to the User's Guide for each device.)
8. Connect the AC cord and the SAS cable to the Device Expansion Unit.
9. Turn on the power of the Device Expansion Unit.
10. Turn on the powers of the NEC Express Servers.
If the LED does not light, install the power unit again. If the LED status remains unchanged,
contact your maintenance service company.
Device power
cable and then
connect it.
DC power
cable
- 34 -
Connect
DC
power
SAS cable
Advertisement
Table of Contents
