ZyXEL Communications Omni TA128 User Manual page 94

Chapter 16 - AT Command Set Reference
Command Options Function & Description
&Zn=s n=0-39
&ZIn=s n=0-7
s=phone
number
n=0
n=1
n=2
n=3
n=4
n=5
n=6
n=7
&ZI?
&ZO?
&ZOn=x
Write phone number/s to NVRAM at
location n (n=0-39) use AT*Dn or
ATS29=n to set the default dial pointer.
MSN setting. Assign the phone number
(including subaddress, if any) for various B
channel protocols. In answer mode, these
numbers will be compared with the received
called_party_number and
called_party_subaddress information. The
call will be accepted using the specific
protocol if the assigned number of this
protocol matches with the
called_party_number.
assigns MSN 's', phone number for X.75
assigns MSN 's', phone number for V.110
assigns MSN 's', phone number for V.120
assigns MSN 's', phone number for PPP,
MPPP
assigns MSN 's' for ISDN data, protocol
auto-detection
Assign the phone number 's' for analog
adapter, Phone 1
Assign the phone number 's' for the analog
adapter, phone 2
Display the phone number (including
subaddress , if any) for various B channel
protocols
Display the &ZOn setting
Write own phone number (including sub-
address, if any). The number specified will
be used as the calling party number whiling
dialing. Value for "n"
I = ISDN data
A= analog adapter, Phone 1
B= analog adapter, Phone 2
16-9
Ref.