ZyXEL Communications Omni TA128 User Manual page 40

Chapter 5 - Setup for Windows 95 and NT
14) In this dialog box, click on the down arrow of the "Initial speed (BPS)" field and
select the maximum speed of your modem (DTE Speed). From "Hardware
features," select all three options. When all these selections are made, click on OK.
You will then be returned to the previous window.
15) Click on the Network button. Select the PPP radio button, then select "TCP/IP,"
and "Request LCP extensions (RFC 1570)." Now click on the "TCP/IP Settings"
button.
16) Click the IP address option that is required by your ISP (usually server assigned IP
address). Now select the "Use specific name server addresses" and enter the DNS
and DNS backup IP addresses given to you by your ISP. Also select the "Use VJ
header compression" and "Use default gateway on remote network" selections if
your ISP supports these features.
17) Click the OK buttons until you return to the "Edit Phone Book Entry" window, then
click on the "Security" button. The rest of this is dependent on your ISP. If you are
making an NT to NT server just check "Accept Authentication," and click OK.
18) Finally Click OK again, then click "Dial." Your Omni TA128 will dial the number
and establish a connection.
5-8