•
DLN6986A, TETRA CRYPTR Micro AES256
IMPORTANT: The following procedure must be performed only in non-hazardous environment.
Prerequisites:
Your radio is equipped with a SIM/microSD card slot.
Prepare T-5IP TORX – PLUS screw bit and 1.0 ±0.1 in-lbs torque screwdriver.
Procedure:
1 Remove the battery.
2 Remove the SIM card door (see
3 Slide the SIM card holder toward the dust cover side of the radio (as indicated by the UNLOCK
arrow) to unlock it and lift it up.
4 Slide the microSD card holder toward the top of the radio (as indicated by the UNLOCK arrow)
to unlock it and lift it up.
Installing the SIM Card on page
MN006260A01-AG
Chapter 2 : Getting Started
21).
25