Table of Contents
Advertisement
Procedure:
1 From the home screen, press and hold Right Navigation.
Your radio displays dialing number prompt.
2 Rotate the Rotary Knob or press Up or Down Navigation key to choose the number, then press
the Rotary Knob or Right Navigation key to go to the next digit.
NOTE:
•
You can enter # at the end when the Speed Dialing feature is enabled.
•
The + sign you can enter only when you are editing the first position. Both signs are
available after digit 9.
3 Press the PTT or the Send key (only in TMO).
5.7
DTMF Overdial
This feature allows you to communicate with an automated answering device (for example, the voice
mail or answering machine) during an on-going private, phone or PABX call.
While in an on-going private, phone or PABX call, press the DTMF keys (0-9, *, #). When pressed, the
DTMF key sounds a tone and the entered digit is displayed on the screen.
5.8
Global Navigation Satellite System (GNSS) Location Service
NOTE: This is a Software Selling Feature.
The Global Navigation Satellite System (GNSS) Location Service feature uses information from GNSS
satellites orbiting the Earth to determine the approximate geographical location of your radio.
The GNSS Location Service availability, accuracy, and the position calculation time vary depending on
the environment in which you use the radio. The GNSS Location Service can assist your dispatcher or
colleagues in many ways. For example, deploying of resources more efficiently or locating your radio
when you trigger your emergency service.
The radio can display the location information directly on the screen or send it over the air to your
dispatcher to display it in the control center. Check your radio configuration details with your service
provider.
The radio supports the following system combinations:
•
GPS
•
GLONASS
•
BeiDou
•
GPS + GLONASS
MN006260A01-AG
Chapter 5 : Features
155
Advertisement
Table of Contents
