Sodex Sport S14633 Manual

DETAILS
SODEX INTERNATIONAL
18 rue de l'Avenir - Bât. 224
14650 CARPIQUET
Tel : + 33 (0) 2.31.53.78.70
Email: karine.chaigneau@sodexinternational.com
DESCRIPTION
Steel structure
Plastified
CONFORM
European standard
NF EN 1270
Decree
SPORT'S LAW 2007
According to the decree above, for the first installation the goal must be tested like below :
Put a vertical and static charge of 320 kg, at the jonction of the pannel and the basket , at 0.20m of the ground, du-
ring one minute.
During the first installation, this stability and solidity test is compulsory.
Every time that the equipment is assembled, a visual check of the stability and solidity must be realized.
The owner must regularly check the condition of the product.
The equipement has to be regularly maintained by the owner. It is adviced to:
- Check every week that all the screws are correctly tightened
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufactu-
rer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
If the forecast planned a bad weather (strong wind,...), the goal should be removed from the sheaths and
put on the ground.
One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has to
be done within the legal period of the reception of the material. The warranty will not apply to:
- all degradation during the transport.
- all degradation due to use differing from which was intended.
- all degradation due to poor maintenance.
- any defect claimed after the end of the legal period.
- any damaged due to a faulty installation and assembly of the module
THIS PRODUCT HAS BEEN BUILT AND DESIGNED ACCORDING TO THE FRENCH AND EUROPEAN STANDARD NF EN 1270
MOBILE BASKETBALL GOAL
PRODUCT REF
SPORT'S LAW 2007
MAINTENANCE
WARRANTY
PRODUCT SHEET
OFFSET :1.6M
S14633
:
UNIT