Download Print this page
Sodex Sport S16112 Assembly Instruction Manual

Sodex Sport S16112 Assembly Instruction Manual

Aluminium folding goal, mobile fixed by anchorage

Advertisement

Quick Links

DESCRIPTION
Structure in aluminium Ø80
Powder coated
3.0 x 2.0 m
CONFORM
European standard
NF EN 749
Decree
SPORT'S LAW 2016
According to the decree above, for the first installation the goal must be tested like below :
-Put a vertical and static charge of 180 kg, on the middle of the crossbar,
- Put an horizontal charge of 110kg at the same point
After testing, the equipment and the fixation system or counterweight should not fail, displace or deform.
When the goal is not used it must be sealed or be stocked somewhere that people can't used it.
During the first installation, this stability and solidity test is compulsory.
Every time that the equipment is assembled, a visual check of the stability and solidity must be realized.
The owner must regularly check the condition of the product, and be sure that it meets the current safety standards.
In order to use our products at there best, it is recommended to follow carefully the notice of instruction, where you
The equipment has to be regularly maintained by the owner. It is advised to:
- Check every week that all the screws are correctly tightened
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufacturer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Clean the product by using dishwasher soap, clean water, and soft cloth.
It is advised to carry out this cleaning once or twice a year, or even more regularly according to the environmental
conditions (saline environment, ...).If the forecast planned a bad weather (strong wind,...), the goal should be remo-
ved from the sheaths and put on the ground.
One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has to be done
within the legal period of the reception of the material. The warranty will not apply to:
-
all degradation during the transport.
-
all degradation due to use differing from which was intended.
-
all degradation due to poor maintenance.
-
any defect claimed after the end of the legal period.
-
any damaged due to a faulty installation and assembly of the module
ASSEMBLY INSTRUCTION
ALUMINIUM FOLDING GOAL, MOBILE
FIXED BY ANCHORAGE
PRODUCT
REF:
SPORT'S LAW 2016
MAINTENANCE
WARRANTY
S16112
PAIR

Advertisement

loading
Need help?

Need help?

Do you have a question about the S16112 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sodex Sport S16112

  • Page 1 ASSEMBLY INSTRUCTION ALUMINIUM FOLDING GOAL, MOBILE FIXED BY ANCHORAGE S16112 PAIR PRODUCT REF: DESCRIPTION Structure in aluminium Ø80 Powder coated 3.0 x 2.0 m CONFORM European standard NF EN 749 Decree SPORT’S LAW 2016 SPORT’S LAW 2016 According to the decree above, for the first installation the goal must be tested like below :...
  • Page 2 FIXATION AND SEALING NECESSARY TOOLS (NOT INCLUDED) Concrete drill D16mm Drill Mallet Post ø80 Rear sealing Rear sealing Variable 250x250x250mm 250x250x250mm dimension NB: All the dimension are in millimeters. Dig the holes for the sealing of the anchors according to the written dimension - Realize the sealing with concret CPJ45 do- sed by 350 kg and wait at least 72 hours (6 days during winter ).
  • Page 3: Necessary Items

    ASSEMBLY NECESSARY TOOLS (NOT INCLUDED) Wrench 17mm Wrench 13mm Allen wrench 6mm INCLUDED ITEMS 1– ASSEMBLY OF CROSS-BAR & POSTS (x4) Step 01: RIGHT POST CROSS BAR Step 02: SS screw M10x30 SIMILAR ASSEMBLY FOR LEFT NECESSARY ITEMS...
  • Page 4 ASSEMBLY 2– ASSEMBLY OF GROUND BAR (x4) SIDE GROUND BAR Screws M8x20 SIDE GROUND BAR + Washers 8 NECESSARY ITEMS 3– ASSEMBLY OF CROSS-BAR & POSTS (x4) Screws M8x20 + Washers 8 Note: The hooks on the top bars have to be on the inside of the goal, while the hooks Screws M8x20 on the bottom bars have to...
  • Page 5 ASSEMBLY 4– ASSEMBLY OF GROUND SUPPORT TO FRAME (x4) Screws M10x100 Note: the nylons washers + Locknuts M10 have to be inserted into + Washers 10 the “U”. Nylon washers NECESSARY ITEMS 5– ASSEMBLY OF REAR FRAME (x4) Screws M10x70 + Locknuts M10 + Washers 10 Nylon washers...
  • Page 6 ASSEMBLY 6– FIXATION OF REAR FRAME & GROUND FRAME (x4) Turn knobs M10x50 NECESSARY ITEMS 7– FIXATION OF THE GOAL TO THE GROUND (x2) POST Anchor plate Eye bolt M12x40 Ground anchor M12x50 NECESSARY ITEMS...
  • Page 7 ASSEMBLY 8-FIX THE PLASTIC HOOK Position of the net hooks on the cross-bar. Position of the net hooks on the post. Note: Put the hooks in position with the help of a soft mallet. NECESSARY ITEMS...
  • Page 8 PACKING LIST ALUMINIUM FOLDING GOAL, MOBILE FUTSAL FIXATION BY ANCHORAGE PRODUCT REF S16112 Index A PAIR NOMENCLATURE Package Weight Dim. Index Designation Description Quantity Packing Method N° (kg) (mm) Cross-bar + Rear ground Plastic bubble + S16112-01 14.2 3200x130x100 Carton 5 layers...
  • Page 9: Packing List

    PACKING LIST ALUMINIUM FOLDING GOAL, MOBILE, FUTSAL FIXATION BY ANCHORAGE PRODUCT REF S16118 Index A PAIR ACCESSORIES PUT IN A CLEAR PVC BAG Package Designation Description Note N° Anchor To fix the goal to the ground Chemical anchor M12x50 + anchor M12x40 Plastic hook To assembly on post...