Elite Screens Starling Tab-Tension 2 Series User Manual

_______________________________________________________________________________________________________________________________
Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedures below.
Caution: The screen's Black Top Drop is already set to its maximum drop limit. There is NO extra black drop material
in the roller. Please be aware that altering the vertical limit switch to drop the screen material off the roller voids
your warranty with Elite Screens
hardwire installations) to this unit are prohibited and will void your warranty.
For more information, please contact our Technical Support Department at
•
Please retain this user's guide for future reference.
•
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the
manufacturer.
•
Handle the unit carefully during transportation to avoid any damages.
•
To ensure safe and reliable operation, make sure the power connection is secure.
•
The power source should be close to the unit and easily accessible.
•
Do not install the unit on uneven, or inclined surfaces.
•
To avoid electrical shock or product damage, do not install this device in a damp place.
•
Do not place any heavy objects over the power cord.
•
Position the power cord properly to avoid creating a trip hazard.
•
Avoid electrical shock or fire, by not overloading the power cord.
•
The internal & external parts of this unit are not end user serviceable. Do not attempt to disassemble this
unit by yourself. Consult an authorized technician instead.
•
Make sure the power source that this unit is connected to has a continuous power flow.
•
If there is need to use an extension cord, make sure said cord has a compatible power rating.
•
Do not handle this or any other electrical device if you are wet or standing in water.
•
Whenever the screen reaches its end of life, follow local environmental guidelines regarding its proper
disposal.
Do not use this unit under the following circumstances.
•
Disconnect the power cord if exposed to moisture, rain, wind, electrical storms or snow.
•
Avoid exposure to direct sunlight or any of the conditions stated in the previous bullet point.
•
Keep away from fire or other high temperature heat sources.
•
Cut off the power supply first before attempting maintenance or removal.
•
Do not attempt to use this screen if there are obvious signs of damage.
•
To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is obvious
damage or if there are any evident broken parts.
Rev.V02182023DT (DS8598)
Starling Tab-Tension 2 Series
Electric Wall/Ceiling Projection Screen
For: CineWhite® (Matte White) and CineGrey 4D
(Ceiling Ambient Light Rejecting) models
Visit
®
. Unapproved changes or modifications (except for cutting the power cord for
1
User's Guide – E/H Type (RC1)
www.elitescreens.com for the latest updated version
www.elitescreens.com
V1.0
www.elitescreens.com