Elite Screens Starling Tab-Tension Series User Manual

Electric wall/ceiling projection screen

Advertisement

Electric Wall/Ceiling Projection Screen
Starling Tab-Tension Series
Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedures below.
Caution: The screen's Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop
in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved changes or
modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void
your warranty. For more information, please contact our Technical Support Dept. at (877) 511-1211 Ext. 604.
Please retain this user's guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by
the manufacturer.
Handle the unit carefully during transportation to avoid any damages.
To ensure safe and reliable operation, direct connection to a properly grounded power source is
advised.
The power outlet supplying power to the unit should be close to the unit and easily accessible.
Do not install the unit on uneven or inclined surfaces.
Do not put heavy objects on the power cord and position it properly to avoid creating a trip
obstacle.
Never overload the power cord to prevent an electric shock or fire due to a loose contact or a
short circuit.
There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by
yourself. No one except authorized technicians can open and make repairs to this unit.
Make sure the power source this unit is connected to has a continuous power flow.
If there is need to use an extension cord, make sure the cord has an equal rating as the appliance
to avoid overheat.
Do not handle the power plug when your hands are wet or your feet are in contact with water.
Do not use this unit under the following circumstances.
Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.
Avoid direct Sunshine, rain shower and moisture.
Keep away from fire sources and high temperature to prevent this device from overheating.
Cut off the power supply first before transportation or maintenance.
Fully disconnect from the power supply when the unit is not in use for a long period of time, as
should be done with any other electric household appliance.
To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is
obvious damage or if there are any evident broken parts.
V010917-DR
User's Guide
www.elitescreens.com
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Starling Tab-Tension Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Elite Screens Starling Tab-Tension Series

  • Page 1 Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void your warranty.
  • Page 2: Pre-Installation

    Elite Screens is not liable for any faulty installations. Individual modifications to this product are prohibited and will void the manufacturer warranty. Please contact Elite Screens Customer Service for any questions.
  • Page 3: Installation Instructions

    Installation Instructions A. Wall Mount I. Flush mount Side view Screen-to-wall installation 1. Determine where the screen will be installed. Then, measure and mark the distance between the top and bottom screw holes from each bracket. 2. Drill a hole on all marked areas and install the brackets on the wall with the screws. Lift the screen up leveled with the brackets, slide the screen in the bracket grooves and push until you hear a “click”...
  • Page 4: Operation

    2. Once the screen has power you’ll be able to control it with the Infared or Radio Frequency remote. Control System The Starling Tab-Tension Series has Infrared and Radio Frequency receivers. You can control the screen’s UP/STOP/DOWN positions utilizing either the IR (Infrared) or RF (Radio Frequency) remotes.
  • Page 5 5. UP/DOWN manual control buttons (located on left side end cap) Press and hold the UP button to retract the screen Press and hold the Down button to deploy the screen Front side of screen For a local Elite Screens contact or Technical Support, please visit www.elitescreens.com V010917-DR...

This manual is also suitable for:

Stt135xwh2-e6

Table of Contents