I Camera Number Setup (Camera Number Setup) (Only For Ps Data); I Network Setup (Network Setup) - Panasonic WJ-HD200 Operating Instructions Manual

I Camera Number Setup
(CAMERA NUMBER SETUP)
(only for PS DATA)
•
Assignable numbers: From 1 to 128, must be unique
in the chain.
Click the [SET] button when all items have been set proper-
ly.
I Network Setup (NETWORK
SETUP)
8 Line Speed (LINE SPEED)
AUTO: The speed is automatically selected.
100Mbps (FULL DUPLEX): 100 mega byte, full duplex
100Mbps (HALF DUPLEX): 100 mega byte, half
duplex
10Mbps (FULL DUPLEX): 10 mega byte, full duplex
10Mbps (HALF DUPLEX): 10 mega byte, half duplex
8 HTTP Server Port (
HTTP SERVER PORT
Enter from the keyboard. The default setting is 80.
8 DHCP On/Off (DHCP ON/OFF)
Select ON or OFF
Configuration Protocol).
)
for DHCP (Dynamic Host
IP Address (IP ADDRESS)
The IP address is displayed. Enter from the keyboard.
Netmask (NETMASK)
The netmask is displayed. Enter from the keyboard.
Default Gateway (DEFAULT GATEWAY)
The default gateway is displayed. Enter in from the key-
board.
8 Domain Name Service (DOMAIN NAME SERVICE)
OFF: Disables DNS, only IP address usable.
MANUAL: Enables DNS.
AUTO: Enables DNS.
Domain Name (DOMAIN NAME)
Enter from the keyboard.
DNS Server Address (DNS SERVICE ADDRESS)
Enter from the keyboard.
8
Dynamic DNS (DYNAMIC DNS)
OFF: Does not use DDNS.
ON: Uses DDNS.
DDNS Host Name (DDNS HOST NAME)
Enter from the keyboard.
DDNS User Name (DDNS USER NAME)
Enter from the keyboard.
DDNS Password (DDNS PASSWORD)
Enter from the keyboard.
DDNS Access Interval (DDNS ACCESS INTERVAL)
Enter from the keyboard.
8 Simple Network Management Protocol
Note: " (double quotation) cannot be used for SNMP.
65