Table of Contents
Advertisement
4. Repeat steps 1, 2, and 3 until all steps are pro-
grammed, or press the [SETUP/ESC] button to return to
the SEQUENCE SETUP menu.
5. Move the cursor to SEQUENCE TIMING in the SEQ
SETUP menu.
Select INT or EXT with the JogDial, and press the
JogDial.
The default is INT.
INT: Forwards the step when the assigned time elaps-
es.
EXT: Forwards the step when the SEQ IN signal is input
to the rear panel.
6. Move the cursor to AUTO SKIP with the [D] or [C] but-
ton.
Select ON or OFF with the JogDial, and press the
JogDial.
The default is ON.
ON: The sequence skips any step where no video is
input.
OFF: The step will be displayed as a blackout screen.
G Spot Sequence Setup (SPOT SEQ
SETUP)
Open the SPOT SEQ SETUP menu to program the
sequence steps for displaying single input images.
1. Move the cursor to the desired step using the [D] or
[C] button.
2. Select a camera number with the JogDial, and press
the JogDial.
The default camera number is identical to the step num-
ber.
Available cameras: From 1 to 8.
Note: The recorder will skip any step assigned "–".
3. Select the duration for the step with the JogDial, and
press the JogDial.
Available durations: 2-30S
40
→
→
→
→
→
→
→
→
4. Repeat steps 1, 2, and 3 until all steps are pro-
grammed, or press the [SETUP/ESC] button to return to
the SEQUENCE SETUP menu.
5. Procedures for SEQUENCE TIMING are the same as
step 5 in MULTI SEQ SETUP.
6. Procedures for AUTO SKIP are the same as in step 6 of
MULTI SEQ SETUP.
G Camera View Setup (CAMERA VIEW
SETUP)
Open the CAMERA VIEW SETUP menu to program the live
image of each camera channel to be displayed or vailed on
the monitor.
1. Move the cursor to the desired camera using the [D] or
[C] button.
2. Select ON or OFF with the JogDial, and press the
JogDial.
The default is ON.
ON: Live image of the channel is displayed.
OFF: Blackout image is displayed.
3. Repeat steps 1 and 2 until all channels are pro-
grammed, or press the [SETUP/ESC] button to return to
the SWITCHER SETUP menu,
Notes:
• Recording will be carried out regardless of this set-
ting.
• The recorded images of the channel will be played
back and displayed on the monitor even if OFF is
selected.
Advertisement
Table of Contents
