Table of Contents
Advertisement
8 Time & Date Search Button (TIME&DATE
SEARCH)
Clicking the button will display the time and date search
dialog.
1. Specify the date, time, and channel.
2. Click the [SEARCH] button.
The image will be searched, and displayed in the
image area.
Note: Searching may take 18 seconds at worst particu-
larly when the recorder runs simultaneous recording
and playback, and/or when the targeted image is of
small size.
8 Camera Control View Button (CAMERA CONTROL VIEW)
Clicking the [CAMERA CONTROL VIEW] button opens
the window.
Camera Select button displays the live image of the
selected camera number.
Main Control Panel Tab returns the window to the
main control panel.
ZOOM (WIDE/TELE) buttons zoom the image in or out.
FOCUS (FAR/NEAR/AUTO) buttons adjust the focus of
the image. When AUTO is clicked, the camera will
adjust the focus by itself.
IRIS (CLOSE/OPEN/RESET) buttons adjust the iris of
the image. When RESET is clicked, the iris will return to
the factory default setting.
AUTO PAN (ON/OFF) buttons allow the camera to pan
endlessly within the preset range.
74
PRESET allows the camera to turn to the preset posi-
tion specified by the number.
PAN/TILT Control:
Clicking the desired direction in the image display area
will move the camera if it is mounted on a pan/tilt table.
The image display area is assigned panning/tilting
function with the mouse click. The 25-split (5x5) areas
are invisible, but each represents a moving direction:
up, down, right or left.
UP
LEFT
DOWN
RIGHT
Advertisement
Table of Contents
