Table of Contents
Advertisement
8. SIM door screws
9. Recessed logo
Location considerations
The following includes best practice considerations for identifying a mounting location:
Ensure the router is positioned to receive optimal signal. A location on the trunk/boot or roof of the vehicle is
recommended.
Note: Cradlepoint recommends selecting a flat section on the exterior of the vehicle to ensure the best adhesion
and prevent leaks.
Avoid installing the device in enclosed spaces.
Ensure that the heat sink pads are in full contact with the metal of the vehicle exterior to help dissipate heat.
Extreme heat or cold can reduce the router's performance.
Mount in locations compliant with the Safety, Regulatory, and Warranty guide, included in the product shipping
box.
SIM card for wireless connectivity
A wireless broadband data plan must be added to the router for wireless broadband connectivity. Network providers
must provision a SIM card to provide wireless broadband data plans compatible for use with the router. Contact your
network provider for further details.
Required tools for setup
Security Torx size T8 (for SIM door cover)
Drill with 22mm (or 15/16") drill bit
Setup
Read through the following to set up the router or use the Verify installation app.
STEP 1: Check box contents
The following should be included in the box:
R2100 Series 5G Ruggedized Router
[1] Power cable
[1] Ethernet Cable
[1] Mounting template
[1] Small accessories kit which includes:
[1] Hex nut
[1] Tooth lock washer
[1] Flat washer
[1] Safety, Regulatory, and Warranty Guide
Accessories
To enable cellular connectivity, at least one activated 4FF-sized SIM card with an active cellular data plan is needed.
Advertisement
Table of Contents
